Discussion of Avionics and Flight Instruments. Such as: EFIS, EIS, GPS, COM, NAV, Antennas, Audio Panels, Steam Gauges
by Lsaircraft » Tue Sep 27, 2016 9:50 pm
Hey guys getting ready to mount my Sp-3HC for the MGL I have the lead under it and foam around it, I see it says center of rotation OK that's not an issue but does it need to be centered in the Aircraft (side to side)? not sure I can do that, Installing in a Kitfox, I am asking you guys because I see Sonex airplanes with this same setup, Thanks TJay Larsen
-
Lsaircraft
-
- Posts: 25
- Joined: Wed Apr 23, 2014 1:01 pm
- Location: Maurice IA
by Fastcapy » Tue Sep 27, 2016 11:14 pm
I would mount it as close to practical to the aircraft centerline.
Mike Beck
Oshkosh, WI (KOSH)
Sonex #1145 N920MB
Std Gear, Modified Aerovee, Rotec TBI, Dual Stick, Acro Ailerons
MGL Panel
Airworthiness: 10/24/13, First Flight: 05/18/14
-
Fastcapy
-
- Posts: 335
- Joined: Sun Jan 12, 2014 11:45 am
- Location: KOSH
Return to Avionics and Instruments
Who is online
Users browsing this forum: No registered users and 14 guests