SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Cotton Waiex 191 - N191YX

Use this area to create a thread with photos from your build.
Post a reply

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Fri Nov 22, 2013 12:27 am

Drilled the ribs to the right side tonight.
Attachments
image.jpg
image.jpg (76.96 KiB) Viewed 280809 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Mon Dec 02, 2013 11:06 pm

We riveted together the left ruddervator tonight. Actually we have done every other rivet and half to go back and do the rest. This part is light and stiff.
Attachments
image.jpg
image.jpg (102.39 KiB) Viewed 280751 times
image.jpg
image.jpg (108.37 KiB) Viewed 280751 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sat Dec 14, 2013 12:48 am

Pinned ruddervator. Fiberglass tips are next.
Attachments
image.jpg
image.jpg (88.97 KiB) Viewed 280672 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sun Dec 15, 2013 6:34 pm

The mini-rudder, ready to updrill.
Attachments
image.jpg
Adam drilled most of the holes
image.jpg (113.05 KiB) Viewed 280642 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sat Dec 21, 2013 10:32 am

Riveted drive horn and ribs.
Attachments
image.jpg
image.jpg (102.88 KiB) Viewed 280599 times
image.jpg
image.jpg (92.82 KiB) Viewed 280599 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Rynoth » Sat Dec 21, 2013 11:54 pm

Brian, curious, did you countersink those solid rivets in the mini-rudder drive horn?
Ryan Roth
N197RR - Waiex #197 (Turbo Aerovee Taildragger)
Knoxville, TN (Hangar at KRKW)
My project blog: http://www.rynoth.com/wordpress/waiex/
Time-lapse video of my build: https://www.youtube.com/watch?v=Q8QTd2HoyAM
User avatar
Rynoth
 
Posts: 1308
Joined: Fri Jul 26, 2013 1:32 pm
Location: Knoxville, TN
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sun Dec 22, 2013 12:59 am

Ryan,
Yes I did. It looked like I was going to have an interference issue with the rivets, based on where I put the holes in the skin. With countersunk flush rivets no issue.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Mon Dec 23, 2013 6:20 pm

Mini rudder done. We have started the fuselage. I have to update my signature.
Attachments
image.jpg
image.jpg (95.58 KiB) Viewed 280543 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Thu Dec 26, 2013 12:58 am

Left stabilizer tip. Just need to drill the rib to the tip. The fit is not perfect, but I decided that better is the enemy of good enough. Moving on!
Attachments
image.jpg
image.jpg (72.76 KiB) Viewed 280498 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby MichaelFarley56 » Thu Dec 26, 2013 1:56 pm

Things are looking great Bryan! You've been making excellent progress on the tail assembly, and I'm sure you're excited to start the fuselage here soon.

Keep it up!
Mike Farley
Waiex #0056 - N569KM (sold)
Onex #245
MichaelFarley56
 
Posts: 1485
Joined: Thu Jun 02, 2011 11:38 pm
Location: Columbus, Ohio
Top

PreviousNext
Post a reply

Return to Photo Album

Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.