random user submitted photo
Sonex #813 First start
5 posts
• Page 1 of 1
Sonex #813 First start
by tonyr » Sat Aug 09, 2014 9:38 pm
Hi Guys,
Fired up the 2200 Jab on Sonex 813 for the first time on Saturday 9 August.
Evidence here: https://www.youtube.com/watch?v=5yWQfZOUeZk
Took a few goes as the throttle wasnt open enough. Ran it at 1200 to 1500 rpm for about 5 minutes.
Was late in the day and my helper had to leave so we put it away.
A check of the engine revealed a small leak from the OCA but that was about all.
Over 8 years on and off to this point, not much longer now!
Cheers
Tony
Fired up the 2200 Jab on Sonex 813 for the first time on Saturday 9 August.
Evidence here: https://www.youtube.com/watch?v=5yWQfZOUeZk
Took a few goes as the throttle wasnt open enough. Ran it at 1200 to 1500 rpm for about 5 minutes.
Was late in the day and my helper had to leave so we put it away.
A check of the engine revealed a small leak from the OCA but that was about all.
Over 8 years on and off to this point, not much longer now!
Cheers
Tony
Sonex #813
First Flight... 4 Oct 14
298 hours having fun!
http://sonexaus.wikispaces.com/Tony+%28Richo%29+Richardson+Sonex+813
First Flight... 4 Oct 14
298 hours having fun!
http://sonexaus.wikispaces.com/Tony+%28Richo%29+Richardson+Sonex+813
-
tonyr - Posts: 200
- Joined: Thu Jun 27, 2013 12:50 am
Sonex #813 First start
by Sonex1517 » Sat Aug 09, 2014 10:31 pm
Way to go Tony!
Looking forward to hearing that first flight report!
Robbie Culver
Sonex 1517
Chicagoland
Tails and Wings complete - finishing fuselage.
N1517S reserved
Looking forward to hearing that first flight report!
Robbie Culver
Sonex 1517
Chicagoland
Tails and Wings complete - finishing fuselage.
N1517S reserved
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
-
Sonex1517 - Posts: 1670
- Joined: Fri Jun 03, 2011 10:11 am
- Location: T25 Aero Estates, Frankston, TX
Re: Sonex #813 First start
by Bryan Cotton » Sat Aug 09, 2014 11:06 pm
Tony,
As I am here in the throes of replacing a hockey stick, it brings me motivation and hope. Thanks!
As I am here in the throes of replacing a hockey stick, it brings me motivation and hope. Thanks!
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5494
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
Re: Sonex #813 First start
by rizzz » Sun Aug 10, 2014 9:21 am
That's awesome Tony!
Hope to get to that point as well in the not too distant future (hopefully).
Hope to get to that point as well in the not too distant future (hopefully).
Michael
Sonex #145 from scratch (mostly)
Taildragger, 2.4L VW engine, AeroInjector, Prince 54x48 P-Tip
VH-MND, CofA issued 2nd of November 2015
First flight 7th of November 2015
Phase I Completed, 11th of February 2016
http://www.mykitlog.com/rizzz/
Sonex #145 from scratch (mostly)
Taildragger, 2.4L VW engine, AeroInjector, Prince 54x48 P-Tip
VH-MND, CofA issued 2nd of November 2015
First flight 7th of November 2015
Phase I Completed, 11th of February 2016
http://www.mykitlog.com/rizzz/
- rizzz
- Posts: 869
- Joined: Tue Jun 21, 2011 2:07 am
- Location: Wollongong, NSW, Australia
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 33 guests
