Ground Adjustable Prop

Discussion of the Aerovee kit engine.

Ground Adjustable Prop

Postby Captain Clanger » Sun May 11, 2014 3:55 pm

Has anyone tried it?

Interested in results, particularly TO performance with it set fine.
Captain Clanger
 
Posts: 8
Joined: Mon Apr 28, 2014 6:09 am

Re: Ground Adjustable Prop

Postby mike.smith » Sun May 11, 2014 9:24 pm

Captain Clanger wrote:Has anyone tried it?

Interested in results, particularly TO performance with it set fine.


I hope to be flying in a couple of weeks. I'll let you know then!

Mike
Mike Smith
Sonex N439M
Scratch built, AeroVee, Dual stick, Tail dragger
http://www.mykitlog.com/mikesmith
mike.smith
 
Posts: 1430
Joined: Tue Jan 29, 2013 8:45 pm

Re: Ground Adjustable Prop

Postby Brett » Mon Jun 23, 2014 7:18 pm

Thought I'd just revive this old thread and ask if anyone has any more info about how the ground adjustable prop performs?
Sonex 1645
VH-VWS
Tailwheel
Former Aerovee Turbo
Rotax 912
Brett
 
Posts: 269
Joined: Tue Apr 08, 2014 3:49 am
Location: Geraldton W.A Australia

Re: Ground Adjustable Prop

Postby mike.smith » Mon Jun 23, 2014 9:30 pm

I just made my first flights this weekend! http://youtu.be/sOp9UugkzC0

Before I flew I set the prop at a medium pitch. At a full power runup it only turned about 2,600 RPM. So I reset it to the lowest pitch and got just shy of 3,000 RPM on the ground.

On takeoff on my first flights I got just shy of 3,000 RPM, though I did not pay attention to the climb rate. I haven't gotten it to WOT in flight due to watching the temps, but I have seen 3,000 RPM a few times and I don't think I was at full throttle yet.

I'll report more when I'm spending less time watching the engine and more time checking the numbers.

Mike Smith
Mike Smith
Sonex N439M
Scratch built, AeroVee, Dual stick, Tail dragger
http://www.mykitlog.com/mikesmith
mike.smith
 
Posts: 1430
Joined: Tue Jan 29, 2013 8:45 pm


Return to Aerovee

Who is online

Users browsing this forum: No registered users and 21 guests