SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

F10-16 Idler Assembly

Discussion for Sonex builders on specific plans page experience. These posts are limited to technical suggestions such as assembly order, challenges, or techniques related to specific plans pages.
Post a reply

F10-16 Idler Assembly

Postby vernd » Sun Apr 13, 2014 10:29 pm

Just working on F10-16 Idler Assembly. Have a question around the Symmco oilite bronze flanged bushings. I believe these come already impregnated with oil. Just wondering if any further oiling is required before assembly.
Thanks...Vern
Sonex 613 (slow scratchbuild)
Vern Dueck - Innisfail, Alberta
Sonex 613 Slow Scratchbuild
Taildragger , Aerovee(turbo),
vernd
 
Posts: 44
Joined: Fri Mar 28, 2014 12:04 am
Location: Alberta, Canada
Top

Re: F10-16 Idler Assembly

Postby n502pd » Sun Apr 13, 2014 10:49 pm

Hi Vern! sorry I didnt see this earlier. I wondered that myself, but am not proud to not go ahead and lather them up as I assembled them, just to make sure. Years ago a valued AP/IA assisted me in rebuilding my O-300 for my recently departed C172, and his method of assembly lube for engines was 50/50 mix of STP and white lithium grease, well sturred...not shaken... to make a very nice sticky mess. But it works! thats what I am using. :)
Joe Nelsen
scratch built :D
Sirpeedee, N502PD, s/n 1510, Aero Vee 2.1 s/n 0870,
ADS-B in (Stratux)/out(SkyBeacon)
Flying @81.7
KGYI/N. Tx Reg/Perrin Field
EAA Technical Counselor, Chapter 323, Sherman, TX
User avatar
n502pd
 
Posts: 380
Joined: Sat Feb 23, 2013 12:13 am
Location: Gunter, Texas
Top

Re: F10-16 Idler Assembly

Postby Rynoth » Sun Apr 13, 2014 10:51 pm

I just did this assembly last week... it's basically the same bearing setup as the aileron bellcranks, which carry the note "Lubricate with white lithium grease." So that's what I did here, too.
Ryan Roth
N197RR - Waiex #197 (Turbo Aerovee Taildragger)
Knoxville, TN (Hangar at KRKW)
My project blog: http://www.rynoth.com/wordpress/waiex/
Time-lapse video of my build: https://www.youtube.com/watch?v=Q8QTd2HoyAM
User avatar
Rynoth
 
Posts: 1308
Joined: Fri Jul 26, 2013 1:32 pm
Location: Knoxville, TN
Top

Re: F10-16 Idler Assembly

Postby vernd » Sun Apr 13, 2014 11:19 pm

Thanks for the quick reply guys. That's exactly the information that I was looking for.
Vern
Vern Dueck - Innisfail, Alberta
Sonex 613 Slow Scratchbuild
Taildragger , Aerovee(turbo),
vernd
 
Posts: 44
Joined: Fri Mar 28, 2014 12:04 am
Location: Alberta, Canada
Top

Post a reply

Return to Sonex Plans

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.