by fastj22 » Sun Mar 16, 2014 9:45 am
Wiring the MGL xtreme is easy. Ground, 12v power, external alarm switch wire, and a single signal wire to the RDAC. Another to the Ahrs and compass if you use them. All through a single db9 pre-wired connector. The RDAC is pretty simple too. Each sensor lead has a screw down socket.
I thought I would use the checklists too, but I like my old school flip chart checklist. Also, when using the checklist on the display, you can't see some of the stuff you are checking.
John Gillis
SEL Private, Comm Glider, Tow pilot (Pawnee Driver)
Waiex N116YX, Jabiru 3300, Tail dragger,
First flight, 3/16/2013. 403 hours and climbing.
Home: CO15. KOSH x 5
Flying a B-Model Conversion (Super Bee Baby!)