Cotton's Law

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.

Cotton's Law

Postby flyguy0609 » Sun May 12, 2024 9:49 am

Cotton's law of home building states that " The purpose of the hobby is to buy tools". The first corollary to Cotton's Law is " The quantity of tools will always exceed the available storage." or "Tool Organization is futile".

Any other observations on home building?
flyguy0609
 
Posts: 46
Joined: Tue Aug 03, 2021 12:17 pm

Re: Cotton's Law

Postby Bryan Cotton » Sun May 12, 2024 10:01 am

Excellent - another one is "it will be done next year." Believe it long enough and sooner or later it's true!
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton's Law

Postby BobDz » Sun May 12, 2024 6:41 pm

You only need 200 clecoes.
Bob Dz...
Sonex B, Tri-gear
(technically within walking distance of Sonex)
N624DZ (reserved)

Plans exist to eliminate confusion, not create it.
BobDz
 
Posts: 265
Joined: Mon Oct 02, 2023 3:44 pm

Re: Cotton's Law

Postby WaiexB22 » Sun May 12, 2024 7:05 pm

No matter how long you procrastinate hoping to save on shipping charges, as soon as you place your order to spruce or sonex or jegs or whoever...you will inevitably need something else from there right after you place the order.
Robert
Waiex-B 0022
Yamaha Apex
Building
WaiexB22
 
Posts: 118
Joined: Thu Jun 08, 2023 1:56 pm

Re: Cotton's Law

Postby DCASonex » Mon May 13, 2024 2:07 pm

flyguy0609 wrote:Cotton's law of home building states that " The purpose of the hobby is to buy tools". The first corollary to Cotton's Law is " The quantity of tools will always exceed the available storage." or "Tool Organization is futile".

Any other observations on home building?


Not enough storage space for tools only means that you next investment will be in a bigger shop. Last three moves, shop has gone from 350 sq, ft. to 850, to current 1,150 sq. ft.

David A.
DCASonex
 
Posts: 935
Joined: Mon Sep 12, 2011 8:04 pm
Location: Western NY USA

Re: Cotton's Law

Postby DCASonex » Mon May 13, 2024 2:11 pm

BobDz wrote:You only need 200 clecoes.


Probably adequate if that is 100 each of each of 3/16" and 1/4", for the 1/8" and 3/32" sizes better at least double that.

David A.
DCASonex
 
Posts: 935
Joined: Mon Sep 12, 2011 8:04 pm
Location: Western NY USA

Re: Cotton's Law

Postby flyguy0609 » Sat Jun 29, 2024 6:21 pm

To paraphrase from the responses above,

Cotton's Law states:

"The purpose of the hobby is to acquire tools."
1st expansion. The general theory: "Said acquisition occurs in three phases, #1. Purchase of tools to assemble the "hobby". Phase2, Acquisition of tools to create parts assembled in Part 1. Phase 3 Go whole hog, and get the tools used to make the tools used in Phase 2. 2nd expansion, the special theory, states that the tool requirements grow as an exponent of the phase number. Mathematically : F(x) ^n, where F(x) is a function of the complexity of the hobby and n is the phase number.

I'm ready to make the Haj OSH.
flyguy0609
 
Posts: 46
Joined: Tue Aug 03, 2021 12:17 pm

Re: Cotton's Law

Postby flyguy0609 » Mon Oct 14, 2024 8:21 pm

We recently had a death in the family. THe deceased was a 35 year veteran at United Airlines. His tool accumulation is nothing short of epic.

His garage
20240921_124752.jpg


His Basement.
20240921_124522.jpg


This is just a sample, He had so many tools that he didn't have room to work..
flyguy0609
 
Posts: 46
Joined: Tue Aug 03, 2021 12:17 pm

Re: Cotton's Law

Postby GordonTurner » Wed Oct 16, 2024 6:12 pm

“…so many tools that he didn’t have room to work…”

There must be a corollary contained therein :)
Waiex 158 New York. N88YX registered.
3.0 Liter Corvair built, run, and installed.
Garmin panel, Shorai LiFePo batteries.
GordonTurner
 
Posts: 668
Joined: Tue Feb 21, 2012 1:14 am
Location: NY, NY

Re: Cotton's Law

Postby flyguy0609 » Fri Oct 18, 2024 5:17 pm

GordonTurner wrote:“…so many tools that he didn’t have room to work…”

There must be a corollary contained therein :)


And when there's a corollary, there's a math function closely followed by an algorithm being chased by a mischief of techies. :)
flyguy0609
 
Posts: 46
Joined: Tue Aug 03, 2021 12:17 pm


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 32 guests