High Oil Temps

Jabiru 2200 / 3300 discussions

High Oil Temps

Postby sonex293 » Sat Jun 04, 2011 8:39 pm

Just as a reminder.....

Don't over fill the Jabiru engines with oil. You will be greeted by high oil temperatures. I almost messed myself on my first flight after an oil change when my Oil Temps started to climb getting close to 240F....... On investigation after landing, I found two problems....First I had about 1/2 quart too much oil......not sure how that happened, and I also found a baffle that was moving out of place when the cowl was installed. Fixed both of those and my oil temp problems have vanished.

Just a FYI!

--
Michael Crowder
Sonex N293SX
--
Michael Crowder
ex- Sonex N293SX
Current - Just Highlander N371EM
User avatar
sonex293
 
Posts: 57
Joined: Sat Jun 04, 2011 8:04 pm
Location: Cary, NC

Re: High Oil Temps

Postby N111YX » Sat Jun 04, 2011 9:43 pm

Yep, I have found that about 3.2 quarts of oil after a change brings it into the magic "lower 1/3rd" range on the dipstick...
Kip

2010 Waiex 0082 (first flight May 2010)
Jabiru 3300 #1637 and #3035
Dynon D-180
Becker radios
Garmin GDL 82 ADS-B
1175 hours
48 states visited
Based near Atlanta

Also flying a...
2000 Kolb Firestar II, Rotax 503, 575 hours
N111YX
 
Posts: 711
Joined: Fri Jun 03, 2011 9:43 am
Location: Atlanta, GA USA

Re: High Oil Temps

Postby Wood » Sun Sep 01, 2024 9:18 am

Yup that’s what I thought. Does take much either. Just did my annual and during the maintenance test flight after that found my oil temps increased to 220. Never done that before and suspected that I filled the oily to much. Need to drain some oil.

Thanks for posting this thread as a reminder

Mark
Lyncrest Airport - CJL5
Winnipeg, Manitoba
Sonex Legacy #0327
Jabiru 2200
Serial # 22A 1130
AeroConversions
Wood
 
Posts: 64
Joined: Sat Aug 14, 2021 9:38 am
Location: Winnipeg


Return to Jabiru

Who is online

Users browsing this forum: No registered users and 15 guests