by Bryan Cotton » Mon Jul 01, 2024 11:41 am
Area 51% wrote:Just to be different (and the wires were so short they would touch the exhaust pipe) I ran the bottom mag wires to the bottom of the rear cylinders. It ended up working famously.
That's really clever. I melted one of those wires early in phase 1 and had to come up with adel clamps mounted to the intake tube.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23