EricS wrote:If I'm not mistaken, the factory can only provide transition training at OSH per their Letter of Deviation Authority (LODA) from the FAA.
I'll have to take a look at my LODA paperwork next time I'm up at the airplane, but from what I remember, as long as the airplane isn't in Phase 1 you should be allowed to conduct training anywhere.
In the end, all the LODA really allows is the owner of the aircraft to get paid for training. The FAA issues these LODA's to supersede the original aircraft Operating Limitations that state the aircraft can't be used for compensation or hire, so I view the LODA as a permission slip for the airplane(s), not the instructors. I don't recall anything in writing indicating where the training must be accomplished, or who's allowed to perform the training. I'm sure if things keep getting busier at the factory, Joe and Drew may be looking for additional instructors!
In order to apply for a LODA, you do need an organized training syllabus which is why the T-Flight training syllabus was created. Howerver, with this sort of training being conducted via FAR Part 61, there's no "set in stone" transition training course requirements that HAS to be followed. In fact, you can go on the Sonex website or the Foundation's website and download the syllabus for your own use. The entire point of the T-Flight program, or anyone else using the syllabus, is to get the new Sonex pilot comfortable with the flight characteristics of the airplane, and meet any insurance required training times.
All that being said, I don't believe it's the factory plan to start staging an on-site training program outside of the factory (although some of those factory instructors may not fight too hard to head to Florida over the winter, right Joe?!). I think an excellent part of the T-Flight program is being located at the factory. While you conduct your training, you can tour the factory, sit in different airplanes, talk to the designers, etc. The factory is a cool place to visit!!