by Bryan Cotton » Sat Oct 21, 2023 6:57 pm
We were flying patterns today and started getting a noise from the tailwheel. Knocked it off and discovered this crack. The tailwheel bracket was noticably bent.
- cracked tw bracket on airplane.png (624.37 KiB) Viewed 1795 times
Powdercoat stripped off:
- cracks after powder coat removal.png (467.91 KiB) Viewed 1795 times
I welded it back up, and welded on some doublers as well.
- painted reinforced bracket.png (470.1 KiB) Viewed 1795 times
Edit: the smaller cracks were hidden by the powdercoat. The noise was the pivot bolt head dragging on the ground. The noise started off just when we hit a bump, then got more steady.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23