SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Arbor Press

Discussion for builders, pilots, owners, and those interested in building or owning a second generation Sonex or Waiex.
Post a reply

Arbor Press

Postby BobDz » Fri Oct 20, 2023 12:34 pm

Is the Harbor Freight 1 ton press sufficient to put the 35 degree bend into the T12-07 Forward Spar Fitting?
Bob Dz...
Sonex B, Tri-gear
(technically within walking distance of Sonex)
N624DZ (reserved)

Plans exist to eliminate confusion, not create it.
BobDz
 
Posts: 265
Joined: Mon Oct 02, 2023 3:44 pm
Top

Re: Arbor Press

Postby kmacht » Fri Oct 20, 2023 12:48 pm

It’s overkill. Most have done it with a simple jig made of 3 pieces of pipe squeezed with a regular vice. It’s aluminum, not steel and bends relatively easily.
kmacht
 
Posts: 772
Joined: Tue Jun 21, 2011 11:30 am
Top

Re: Arbor Press

Postby BobDz » Fri Oct 20, 2023 1:02 pm

Vise worked great!

Thanks for that tip.
Bob Dz...
Sonex B, Tri-gear
(technically within walking distance of Sonex)
N624DZ (reserved)

Plans exist to eliminate confusion, not create it.
BobDz
 
Posts: 265
Joined: Mon Oct 02, 2023 3:44 pm
Top

Re: Arbor Press

Postby mike.smith » Tue Oct 24, 2023 5:58 pm

Several simple jigs for bending can be made, like this:

http://www.mykitlog.com/users/display_l ... 4303&row=2
http://www.mykitlog.com/users/display_l ... 4304&row=1
Mike Smith
Sonex N439M
Scratch built, AeroVee, Dual stick, Tail dragger
http://www.mykitlog.com/mikesmith
mike.smith
 
Posts: 1430
Joined: Tue Jan 29, 2013 8:45 pm
Top

Post a reply

Return to Sonex-B / Waiex-B

Who is online

Users browsing this forum: No registered users and 22 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.