Canopy design flaw? Possible fix.

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.

Re: Canopy design flaw? Possible fix.

Postby AlexZ » Wed Oct 11, 2023 7:26 am

Canopy_latch.jpg
Canopy_latch.jpg (57.35 KiB) Viewed 3414 times

This is a simple latch at the rear.
Alex
Flying:
Sonex Legacy TD PH-AWX Aerovee https://www.facebook.com/SonexPHAWX/
RV-7A PH-PWP
Building:
Piel CP1320 https://eaabuilderslog.org/?s=CP1320
AlexZ
 
Posts: 51
Joined: Fri May 27, 2016 8:06 am

Re: Canopy design flaw? Possible fix.

Postby peter anson » Wed Oct 11, 2023 7:56 am

Lots of good ideas here so I may as well plug mine. There are more than 80 of these out in Sonexland and I have not heard of one failing. They lock in two ways:
1. The handle goes over center.
2. The handle is locked in place by a ball into a recess in the housing. It can only be released by pressing a button on the outer handle or pulling the release knob on the inner handle.
Image
It's also pretty intuitive to operate. For more information check http://www.ansoneng.com/sample-page/products-summary/canopy-safety-latch/

It won't prevent your alignment pin from falling out but my canopy is a pretty neat fit. I think that once the canopy is closed it wouldn't be possible for it to move enough for the hook angle to slip out of the holes.

Peter
peter anson
 
Posts: 558
Joined: Thu Jul 31, 2014 2:34 am
Location: Mount Macedon, Australia

Re: Canopy design flaw? Possible fix.

Postby Scott Todd » Wed Oct 11, 2023 9:42 am

I agree with Peter. With his latch closed, its not possible for the canopy to move enough to become dis-engaged. Well at least on my Onex installation ;) I've flown several Sonex's and think Peter's latch is almost a must-have. It's so positive, locks in place, and allows access from both sides. Here is the thread with a few more details on mine:

viewtopic.php?f=5&t=6250
Scott Todd
 
Posts: 374
Joined: Mon Jun 24, 2019 7:40 pm
Location: Chandler, AZ

Re: Canopy design flaw? Possible fix.

Postby GLENDSMITH » Wed Oct 11, 2023 5:40 pm

Interesting topic. My ONEX was built per plans and the canopy has seemed fine. One thing I have in my emergency checklist is to pull the safety pin so the canopy can be opened from the inside or outside easily. I have also been pulling the safety pin on final during normal landings just incase something goes wrong. Do you guys think I may be making a mistake?
GLENDSMITH
 
Posts: 7
Joined: Tue Mar 25, 2014 12:55 pm

Re: Canopy design flaw? Possible fix.

Postby Bryan Cotton » Wed Oct 11, 2023 6:24 pm

Glen,
That seems like a bad idea to me. Maybe on short final of an emergency landing makes sense, but for a normal landing I'd vote no. What if you have to go around and the canopy opens?
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Canopy design flaw? Possible fix.

Postby Dave Wolfe » Wed Oct 11, 2023 7:42 pm

If you crash the canopy will likely break anyway.
Dave Wolfe
 
Posts: 45
Joined: Tue Dec 31, 2019 12:40 pm

Re: Canopy design flaw? Possible fix.

Postby phenry » Sat Oct 21, 2023 5:06 pm

Here is my solution to the canopy lock problem.
Used it for eights years with no issues.
Yes, I know it can not be opened from outside.

IMG1.jpg

IMG2.jpg

IMG3.jpg
Peter Henry
W#149
User avatar
phenry
 
Posts: 60
Joined: Tue Nov 22, 2011 11:29 pm
Location: Newborough Vic. Australia

Previous

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 49 guests