SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Cotton Waiex 191 - N191YX

Use this area to create a thread with photos from your build.
Post a reply

Re: Cotton Waiex 191 - N191YX

Postby 984dm » Mon Sep 04, 2023 9:23 am

Congratulations to Adam! Another very "accomplished" young pilot joins the Sonex family!
Dave M.
Bloomer, WI
Legacy Sonex N984DM (N number reserved, project is a work in progress)
Tri gear with center stick
Revmaster 2300
MGL XTreme EFIS/EMS, MGL V6, Sandia STX 165
984dm
 
Posts: 39
Joined: Wed Jul 25, 2012 6:39 pm
Top

Re: Cotton Waiex 191 - N191YX

Postby WaiexN143NM » Mon Sep 04, 2023 10:26 am

hi all,
Congrats to adam for getting his ppl. did he solo the waiex?

also to bryan for mentoring and teaching many life skills to him!

thanks for sharing the journey………





michael.
WaiexN143NM
 
Posts: 1206
Joined: Mon Sep 15, 2014 1:04 am
Location: palm springs CA
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Mon Sep 04, 2023 12:04 pm

Thanks guys! Adam did his first Waiex solo this morning. Here is a picture after 3 full stops.
Adam post Waiex Solo.png
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5495
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Mon Sep 04, 2023 12:36 pm

Smaller Adam turning final Waiex.png
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5495
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Mon Sep 04, 2023 3:53 pm

Last edited by Bryan Cotton on Sun Jan 07, 2024 12:25 am, edited 1 time in total.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5495
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby Area 51% » Mon Sep 04, 2023 4:06 pm

It's such a special feeling when you get to reuse the airplane again after a landing.

Nice job Adam.
Area 51%
 
Posts: 804
Joined: Thu Feb 18, 2016 7:57 am
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Mon Sep 04, 2023 4:26 pm

Area 51% wrote:It's such a special feeling when you get to reuse the airplane again after a landing.

Nice job Adam.

It was an odd feeling watching it from the ground! Sounds really cool.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5495
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby daleandee » Mon Sep 04, 2023 5:45 pm

Bryan Cotton wrote:Thanks guys! Adam did his first Waiex solo this morning. Here is a picture after 3 full stops.
Adam post Waiex Solo.png


Not just a pilot my friends ... a "tailwheel" pilot! Whoo Hooo!!
User avatar
daleandee
 
Posts: 877
Joined: Fri Feb 01, 2013 6:14 pm
Top

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Tue Sep 05, 2023 9:20 am

daleandee wrote:Not just a pilot my friends ... a "tailwheel" pilot! Whoo Hooo!!

Amen! He actually did his first solo in a J3 six years ago, and also had some training in the C140 back then. He got the tailwheel endorsement before that J3 solo. My dad also had me do my initial training in tailwheel. Something I've always been grateful for.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5495
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Cotton Waiex 191 - N191YX

Postby builderflyer » Tue Sep 05, 2023 9:32 am

Bryan,

Pass along my congratulations to Adam. He now joins a very elite group of sons of Sonex pilots to become licensed pilots themselves. Very special.

Art,,,,,,,,,,,,,,,,,,,Sonex taildragger #95,,,,,,,,,,,,,,,,,,,,Jabiru 3300 #261
builderflyer
 
Posts: 441
Joined: Sat Jul 09, 2016 12:13 pm
Top

PreviousNext
Post a reply

Return to Photo Album

Who is online

Users browsing this forum: No registered users and 6 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.