Cotton Waiex 191 - N191YX

Use this area to create a thread with photos from your build.

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Thu Jun 08, 2023 9:19 am

Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5495
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Tue Jul 18, 2023 12:59 pm

Here's my canopy cover made from walmart tablecloths.
Canopy Cover.png
Canopy Cover.png (514.41 KiB) Viewed 80931 times


It weighs 2.3 lbs with bungees.
canopy cover from front.png
canopy cover from front.png (591.24 KiB) Viewed 80931 times


I made 3 of these tiedowns. Stakes are 3/8" aluminum rod, sharpened on one end and threaded for a nut on the other. The eye is 5/8" and there is a wingnut on top to tighten it up. The holes in the ends are 7/16" so I can angle in the rods. Weighs 1.8 lbs for the 3, plus whatever the rope weighs.
Tiedowns.png
Tiedowns.png (515.24 KiB) Viewed 80931 times


The rod came in an 8' length and I cut out 9 equal length pieces. The flat pieces are 4" long.

I am thinking of making a couple little black storage bags for this stuff, so I can stick it on the glareshield rather than the baggage compartment. That will keep my CG a little further forward to allow low fuel.

Looking forward to Oshkosh!

ps Adam has been building solo time working on his rating. Looking forward to turning him loose in the Waiex.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5495
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sun Jul 30, 2023 3:19 pm

Screenshot_20230730-130017-363.png
Screenshot_20230730-130017-363.png (441.4 KiB) Viewed 80727 times


Screenshot_20230730-125956-143.png
Screenshot_20230730-125956-143.png (446.98 KiB) Viewed 80727 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5495
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Thu Aug 17, 2023 9:42 pm

Screenshot_20230817-203737-853.png
Screenshot_20230817-203737-853.png (398.27 KiB) Viewed 80114 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5495
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Weatherpilot » Fri Aug 18, 2023 6:44 am

Nice pictures.
Greg Hubert
Sonex A #972 TD
Aerovee Prince P-Tip / Dual stick
Third Owner
Eastern Panhandle of West Virginia
Weatherpilot
 
Posts: 78
Joined: Tue Sep 27, 2022 9:23 pm
Location: Eastern Panhandle - West Virginia

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sat Aug 19, 2023 2:20 pm

Thanks Greg!
right hand orbit.png
right hand orbit.png (820.98 KiB) Viewed 79963 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5495
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Mon Aug 28, 2023 12:35 am

Night currency:
Last edited by Bryan Cotton on Sun Jan 07, 2024 12:26 am, edited 1 time in total.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5495
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sat Sep 02, 2023 2:20 pm

I have no pictures, but Adam just passed his checkride.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5495
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby daleandee » Sat Sep 02, 2023 2:37 pm

Bryan Cotton wrote:I have no pictures, but Adam just passed his checkride.


Now THAT is great news! Congrats to the new pilot and quite proud father. 8~)
User avatar
daleandee
 
Posts: 877
Joined: Fri Feb 01, 2013 6:14 pm

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sat Sep 02, 2023 2:55 pm

Thanks Dale! I do have a picture.

Adam private checkride.jpg


Next up this weekend is a Waiex solo.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5495
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

PreviousNext

Return to Photo Album

Who is online

Users browsing this forum: No registered users and 8 guests