random user submitted photo
installing flap hinge correctly...
2 posts
• Page 1 of 1
installing flap hinge correctly...
by dboeshaar » Mon Aug 14, 2023 2:03 pm
ARGH!!!
I have destroyed my right flap and will have to make a new one.
As careful as I was, I incorrectly installed the flap hinge and made a mess of the flap. I'll have to build a new one.
Two problems:
The hinge was not straight so I could not install the flap hinge on the wing. Dang! I tried to fix that but wound up ruining the flap. I'll build a new one.
My second issue is that the flap appears to be high on the wing and not properly aligned for airflow.
Can anyone give advice on how to attach the flap hinge correctly? New flaps are expensive! I'm afraid to touch the left flap!
I have destroyed my right flap and will have to make a new one.
As careful as I was, I incorrectly installed the flap hinge and made a mess of the flap. I'll have to build a new one.
Two problems:
The hinge was not straight so I could not install the flap hinge on the wing. Dang! I tried to fix that but wound up ruining the flap. I'll build a new one.
My second issue is that the flap appears to be high on the wing and not properly aligned for airflow.
- Flap too high on wing
Can anyone give advice on how to attach the flap hinge correctly? New flaps are expensive! I'm afraid to touch the left flap!
==============================================================
David Boeshaar
KWHP
TDAIRCRAFT.COM
My Greatest Fear: What if the Hokey Pokey really is what it's all about?
==============================================================
David Boeshaar
KWHP
TDAIRCRAFT.COM
My Greatest Fear: What if the Hokey Pokey really is what it's all about?
==============================================================
- dboeshaar
- Posts: 65
- Joined: Wed Jan 27, 2021 5:21 pm
- Location: KWHP, California
Re: installing flap hinge correctly...
by Bryan Cotton » Mon Aug 14, 2023 2:56 pm
Start at the last post on this page of my thread, and read forward.
viewtopic.php?f=39&t=578&start=810
viewtopic.php?f=39&t=578&start=810
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5496
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests
