Bryan Cotton Poplar Grove, IL C77 Waiex 191 N191YX Taildragger, Aerovee, acro ailerons dual sticks with sport trainer controls Prebuilt spars and machined angle kit Year 2 flying and approaching 200 hours December 23
Here's my canopy cover made from walmart tablecloths.
Canopy Cover.png (514.41 KiB) Viewed 80933 times
It weighs 2.3 lbs with bungees.
canopy cover from front.png (591.24 KiB) Viewed 80933 times
I made 3 of these tiedowns. Stakes are 3/8" aluminum rod, sharpened on one end and threaded for a nut on the other. The eye is 5/8" and there is a wingnut on top to tighten it up. The holes in the ends are 7/16" so I can angle in the rods. Weighs 1.8 lbs for the 3, plus whatever the rope weighs.
Tiedowns.png (515.24 KiB) Viewed 80933 times
The rod came in an 8' length and I cut out 9 equal length pieces. The flat pieces are 4" long.
I am thinking of making a couple little black storage bags for this stuff, so I can stick it on the glareshield rather than the baggage compartment. That will keep my CG a little further forward to allow low fuel.
Looking forward to Oshkosh!
ps Adam has been building solo time working on his rating. Looking forward to turning him loose in the Waiex.
Bryan Cotton Poplar Grove, IL C77 Waiex 191 N191YX Taildragger, Aerovee, acro ailerons dual sticks with sport trainer controls Prebuilt spars and machined angle kit Year 2 flying and approaching 200 hours December 23
Screenshot_20230730-130017-363.png (441.4 KiB) Viewed 80729 times
Screenshot_20230730-125956-143.png (446.98 KiB) Viewed 80729 times
Bryan Cotton Poplar Grove, IL C77 Waiex 191 N191YX Taildragger, Aerovee, acro ailerons dual sticks with sport trainer controls Prebuilt spars and machined angle kit Year 2 flying and approaching 200 hours December 23
Screenshot_20230817-203737-853.png (398.27 KiB) Viewed 80116 times
Bryan Cotton Poplar Grove, IL C77 Waiex 191 N191YX Taildragger, Aerovee, acro ailerons dual sticks with sport trainer controls Prebuilt spars and machined angle kit Year 2 flying and approaching 200 hours December 23
right hand orbit.png (820.98 KiB) Viewed 79965 times
Bryan Cotton Poplar Grove, IL C77 Waiex 191 N191YX Taildragger, Aerovee, acro ailerons dual sticks with sport trainer controls Prebuilt spars and machined angle kit Year 2 flying and approaching 200 hours December 23
Last edited by Bryan Cotton on Sun Jan 07, 2024 12:26 am, edited 1 time in total.
Bryan Cotton Poplar Grove, IL C77 Waiex 191 N191YX Taildragger, Aerovee, acro ailerons dual sticks with sport trainer controls Prebuilt spars and machined angle kit Year 2 flying and approaching 200 hours December 23
I have no pictures, but Adam just passed his checkride.
Bryan Cotton Poplar Grove, IL C77 Waiex 191 N191YX Taildragger, Aerovee, acro ailerons dual sticks with sport trainer controls Prebuilt spars and machined angle kit Year 2 flying and approaching 200 hours December 23
Bryan Cotton Poplar Grove, IL C77 Waiex 191 N191YX Taildragger, Aerovee, acro ailerons dual sticks with sport trainer controls Prebuilt spars and machined angle kit Year 2 flying and approaching 200 hours December 23