Cotton Waiex 191 - N191YX

Use this area to create a thread with photos from your build.

Re: Cotton Waiex 191 - N191YX

Postby builderflyer » Mon Mar 27, 2023 10:33 am

TIRES, my thoughts...........I seriously doubt that the majority of Sonex flyers have a real need for the larger, that also means several pounds heavier, 5x5 tires. I was building my Sonex at the same time as Tony Spicer, David Koelzer, etc. and for whatever reason, we all started with the 5x5 tires. As time went on some of us discarded the larger tires and put the smaller 11.4x5 tires on our planes and never looked back (even Tony who was based at a grass field). Weight is such a killer of performance that I'm continually surprised at how many builders are willing to sacrifice, in any way, the operational characteristics of these little planes while in the air for some real or perceived enhancement while operating on the ground.

So get the toe-in adjusted properly, make 3 point takeoffs and landings, minimize braking, keep 50 psi in the tires, rotate the tires on the wheels, and these little tires will last a very very long time. And, finally, at a discount, buy the unused small tires off other builders who just can't be convinced to use them. Just my opinion after 24 years of following the Sonex product line.

Art,,,,,,,,,,,,,,,Sonex taildragger #95,,,,,,,,,,,,,,,Jabiru 3300 #261
builderflyer
 
Posts: 441
Joined: Sat Jul 09, 2016 12:13 pm

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Mon Mar 27, 2023 11:19 am

And, finally, at a discount, buy the unused small tires off other builders who just can't be convinced to use them.

I've bought one set this way - they are going on now. Anybody else selling some?

I would not put on heavier tires. Weight is the enemy. Especially with 80 HP.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5494
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby sonex892. » Tue Mar 28, 2023 3:35 am

Bryan Cotton wrote:
And, finally, at a discount, buy the unused small tires off other builders who just can't be convinced to use them.

I've bought one set this way - they are going on now. Anybody else selling some?

I would not put on heavier tires. Weight is the enemy. Especially with 80 HP.


Ive been running mcreary 5 x 5 tyres for years. They wear really well and are great for grass. But yeah, they do add a lot of weight.
Steve
Lazair kit 1981 sold
Sonerai 2LS plansbuilt 2003 sold
Sonex kit 2010
Sonerai 2LS project rotax 912
User avatar
sonex892.
 
Posts: 414
Joined: Tue Oct 27, 2015 12:32 am

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Thu Apr 06, 2023 9:49 pm

I have been down for some unplanned maintenance as well as some horrible weather we have had in the midwest. But today everything aligned and we were airborne again.

Matthew looking at Lake Geneva.jpg


Waiex flying 4-6-23.jpg
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5494
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Fri Apr 21, 2023 11:32 pm

Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5494
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby GraemeSmith » Sat Apr 22, 2023 8:01 am

That was fun!

And the aileron roll rate definitely looks faster than mine in the Sonex with standard ailerons.

What:

- entry speed
- pitch up angle
and
- stick deflection

were you using ?
Graeme JW Smith
User avatar
GraemeSmith
 
Posts: 939
Joined: Sat May 18, 2019 8:58 am
Location: RI

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sat Apr 22, 2023 8:42 am

Thanks Graeme! 120kts entry, about 30 degrees pitch up, using most of the available stick deflection. Sometimes all.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5494
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby GraemeSmith » Sun Apr 23, 2023 7:25 pm

Yea - I use anything between 70 and 115 KIAS. 30 pitch up.

On standard ailerons with 115 KIAS my Sonex goes round in about 3.25 sec.
Graeme JW Smith
User avatar
GraemeSmith
 
Posts: 939
Joined: Sat May 18, 2019 8:58 am
Location: RI

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sat May 06, 2023 6:47 pm

Post- annual check flight. My first condition inspection since we completed the airplane.
post annual check flight.png
post annual check flight.png (524.4 KiB) Viewed 41613 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5494
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Wed May 10, 2023 7:31 am

Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5494
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

PreviousNext

Return to Photo Album

Who is online

Users browsing this forum: No registered users and 2 guests