Cotton Waiex 191 - N191YX

Use this area to create a thread with photos from your build.

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sun Jan 29, 2023 3:42 pm

Weather has been poor, and I've had a killer cold so it's been weeks since I've flown. We did a post-maintenance ground run after changing the oil pump and eliminating the oil filter. No preheat (though I heat my hangar to 40) and it started and ran. I feel a lot better about my upcoming Tennessee trip.

test run after.jpg


line to TN.png
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5493
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sun Feb 05, 2023 5:11 pm

First time out of the phase 1 area and Adam's first landings away from home. This is DeKalb, where he is going to college.


Also after that flap rework, we are nicely balanced in roll. I'm pleased.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5493
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sun Feb 05, 2023 11:36 pm

My younger son Matthew's first ride.
vlcsnap-2023-02-05-20h50m57s549.png
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5493
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby WaiexN143NM » Mon Feb 06, 2023 1:19 am

Hi bryan,

Great stuff, good to see you sharing your aviation love with adam and matt.


cheers!

Michael.
WaiexN143NM
 
Posts: 1206
Joined: Mon Sep 15, 2014 1:04 am
Location: palm springs CA

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Mon Feb 06, 2023 2:03 pm

Thanks Michael!

Matthew's first ride - the video:
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5493
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Murray Parr » Mon Feb 06, 2023 11:12 pm

We should start a Sonex smile competition! You blokes so far are the clear winners :-)
Murray Parr
WXB0015
Rotax 912ULS
MGL Explorer Lite
First flight May 6/23
RV9 builder (Sold)
Murray Parr
 
Posts: 248
Joined: Fri Nov 18, 2016 6:50 pm

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sun Feb 12, 2023 11:37 pm

Murray Parr wrote:We should start a Sonex smile competition! You blokes so far are the clear winners :-)

Thanks Murray!

Sunset flight:
sunset flight small.jpg
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5493
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sat Feb 18, 2023 10:25 pm

Stalls:
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5493
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sun Feb 26, 2023 5:53 pm

Flying selfie.jpg


Basler.jpg


Last time the airplane was here it was all parts.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5493
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Cotton Waiex 191 - N191YX

Postby Bryan Cotton » Sun Feb 26, 2023 10:23 pm

Bryan Cotton wrote:I've reworked my flap. Ready for flight test.
first pass flap rigging.jpg

Here is some follow up on my flap issue. With the reworked flap, the airplane flies exceedingly true. We have installed the flap stops. On our flight to and from KOSH today we could trim up and fly hands off.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5493
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

PreviousNext

Return to Photo Album

Who is online

Users browsing this forum: No registered users and 10 guests