SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Oil pump mounting bolts - size?

Discussion of the Aerovee kit engine.
Post a reply

Oil pump mounting bolts - size?

Postby Bryan Cotton » Mon Dec 05, 2022 11:34 pm

Hey all,
I want to make sure I get the proper Gene Berg pressure relief cover. One of the ways they distinguish between oil pumps is 6mm vs 8mm mount bolts. Can anybody with an unassembled Aerovee check for me? They have 13mm heads so I'm guessing 8mm but would appreciate confirmation.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Oil pump mounting bolts - size?

Postby Area 51% » Tue Dec 06, 2022 7:51 am

8mm...........
Area 51%
 
Posts: 804
Joined: Thu Feb 18, 2016 7:57 am
Top

Re: Oil pump mounting bolts - size?

Postby Bryan Cotton » Tue Dec 06, 2022 10:22 am

Thanks!
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Oil pump mounting bolts - size?

Postby Murray Parr » Tue Dec 06, 2022 3:46 pm

The head size is usually 150% of the bolt size so yours is most likely 8mm
Murray Parr
WXB0015
Rotax 912ULS
MGL Explorer Lite
First flight May 6/23
RV9 builder (Sold)
Murray Parr
 
Posts: 248
Joined: Fri Nov 18, 2016 6:50 pm
Top

Re: Oil pump mounting bolts - size?

Postby Bryan Cotton » Sat Dec 17, 2022 2:38 pm

Another question for the group. Do we have 26mm gears or 30mm gears? From what I've read the measurement is the height of the gears, so the diameter is the same. If somebody has a pump that is not installed yet can you measure it for me?

Thanks,
Bryan
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Oil pump mounting bolts - size?

Postby Area 51% » Sat Dec 17, 2022 3:02 pm

Mine are 26mm.
Area 51%
 
Posts: 804
Joined: Thu Feb 18, 2016 7:57 am
Top

Post a reply

Return to Aerovee

Who is online

Users browsing this forum: No registered users and 57 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.