Builders web sites?

[Chuck26287]

Go to http://www.mykitlog.com and you can search for specific planes being built. There are a lot of Sonex aircraft on there, some being the B-models.

[dboeshaar]

You will need a Press to do some metal bending i would get a cheapo harbor freight model as you only use it in a few places'... etc.

Thanks!
Yes, lots of good stuff here. I was building a Vans RV-9A so I actually have almost all of that stuff. Measuring tools = Very Important. I do like my pneumatic cleco gun!
1X and 2X rivet guns will be of little use here I think.
I do have a good quality Pop rivet gun (Can I say pop rivets here?) AND I bought an electric Milwaukee "pulled-rivet" gun too.
Tons of deburring tools, but do you have a source for a #30 double deburr tool?
Thanks to all and glad to get underway eating elephants!

AND

If I only need 100 pounds of elbow grease, this will be WAY easier than a Vans!

Dkb

[lakespookie]

For the deburring tools i went through brown tool, https://www.browntool.com/Listview/tabid/344/txtSearch/deburr/Default.aspx The Dogleg and coarse file wood block are probably sufficent although i could see the fine file version being useful

[dboeshaar]

Tail kit arrived today!
No damage, inventory completed.
Ready to Rock and Roll!

Thank you everyone for advice. I'm underway!

David Boeshaar
Project Phoenix
TDAIRCRAFT.COM
============================================================
"My Biggest fear: What if the hokey pokey really is what it's all about?"
============================================================