SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Pulley in aft fuselage, vertical Z #1

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.
Post a reply

Re: Pulley in aft fuselage, vertical Z #1

Postby Rynoth » Wed Jan 15, 2014 9:07 pm

Yea, what phenry just illustrated is what I was talking about also. Easy enough to fix but the bracket dimensions don't quite work without this.
Ryan Roth
N197RR - Waiex #197 (Turbo Aerovee Taildragger)
Knoxville, TN (Hangar at KRKW)
My project blog: http://www.rynoth.com/wordpress/waiex/
Time-lapse video of my build: https://www.youtube.com/watch?v=Q8QTd2HoyAM
User avatar
Rynoth
 
Posts: 1308
Joined: Fri Jul 26, 2013 1:32 pm
Location: Knoxville, TN
Top

Re: Pulley in aft fuselage, vertical Z #1

Postby Bryan Cotton » Wed Jan 15, 2014 9:29 pm

Thanks guys, I will clearance those parts.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Pulley in aft fuselage, vertical Z #1

Postby Bryan Cotton » Thu Jan 16, 2014 5:38 pm

Kerry says future parts will not have the Sonex fairlead or trim holes in that location, and we will all have to put the right holes in place. He gave me a couple locations for extra rivets to make up for the ones that miss the z channel.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Pulley in aft fuselage, vertical Z #1

Postby Bryan Cotton » Thu Feb 20, 2014 12:12 am

I took my angle sander to those corners. Now I have to go and check off that item on my white board.
Thanks guys for the heads up.
Attachments
image.jpg
image.jpg (82.08 KiB) Viewed 2114 times
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Previous
Post a reply

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 84 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.