SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Intake Elbow Spacers

Discussion of the Aerovee kit engine.
Post a reply

Intake Elbow Spacers

Postby mike.smith » Wed Mar 30, 2022 8:20 pm

When I built my AeroVee years ago there were no spacers between the intake elbows and the heads. Reading the latest assembly manual I see there are now spacers called for (ACV-M01-17). I'm curious what they are for? Anyone know?
Mike Smith
Sonex N439M
Scratch built, AeroVee, Dual stick, Tail dragger
http://www.mykitlog.com/mikesmith
mike.smith
 
Posts: 1430
Joined: Tue Jan 29, 2013 8:45 pm
Top

Re: Intake Elbow Spacers

Postby n502pd » Wed Mar 30, 2022 9:29 pm

as far as I have concluded, foreasier removal of rear spark plugs, without having to remove the elbows. imho...!
Joe Nelsen
scratch built :D
Sirpeedee, N502PD, s/n 1510, Aero Vee 2.1 s/n 0870,
ADS-B in (Stratux)/out(SkyBeacon)
Flying @81.7
KGYI/N. Tx Reg/Perrin Field
EAA Technical Counselor, Chapter 323, Sherman, TX
User avatar
n502pd
 
Posts: 380
Joined: Sat Feb 23, 2013 12:13 am
Location: Gunter, Texas
Top

Re: Intake Elbow Spacers

Postby Area 51% » Thu Mar 31, 2022 11:50 am

Adding them now will almost certainly require repositioning the holes in the rear baffle and alter the height of the carb.

Having said that, if you want a set, I have an unused pair you can have for the cost of shipping.
Last edited by Area 51% on Fri Apr 01, 2022 6:32 pm, edited 1 time in total.
Area 51%
 
Posts: 804
Joined: Thu Feb 18, 2016 7:57 am
Top

Re: Intake Elbow Spacers

Postby mike.smith » Thu Mar 31, 2022 12:26 pm

Just curious. I was looking through the new manual to see if there were any noteable changes.
Mike Smith
Sonex N439M
Scratch built, AeroVee, Dual stick, Tail dragger
http://www.mykitlog.com/mikesmith
mike.smith
 
Posts: 1430
Joined: Tue Jan 29, 2013 8:45 pm
Top

Re: Intake Elbow Spacers

Postby Jerry09w » Thu Mar 31, 2022 9:44 pm

I believe weather you need them or not depends on the part number of the heads. The older heads did not need the spacers, I believe the newer heads do need them.
Jerry09w
 
Posts: 32
Joined: Thu Sep 28, 2017 6:50 pm
Location: Fruita Colorado
Top

Post a reply

Return to Aerovee

Who is online

Users browsing this forum: autopro and 51 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.