by pappas » Mon Aug 30, 2021 9:08 am
If your O/P sender is screwed into the top of the block, and you used some type of thread sealant for the 1/8 inch NPT threads, you may have an intermittent grounding situation. If you have the VDO sender, run a ground wire to it. If you have a Kavlico, it has a ground wire so just make sure it is secure.
It could be something else, but you need to start with a correctly functioning sender.
Lou Pappas
Phoenix, AZ
RV-7A Flying (2024)
Waiex B Turbo (2016)
RV-8 (2009)
Waiex Legacy 3300 (2007)
Hiperlight SNS-9 (1991)
Falcon Ultralight (1989)