by Bryan Cotton » Tue Jun 29, 2021 12:51 pm
Welcome to the forums! The center controls are also called the "sport trainer" configuration in Sonex Speak.
I don't think it would be too difficult to move the engine controls. Keep in mind though that you should also move the flap and brake controls to the center. Otherwise you have to switch hands back and forth.
Flaps: you could go electric, which would make them easy to move. I have mechanical flaps. The flap torque tube has two tabs that you can bolt to - left side or center. You have to make the sport trainer flap/brake stops which rivet to the spar tunnel in the center.
Brakes - sort of like the flaps, except you will need to attach the master cylinder to the square floor stiffener in the center of the cockpit.
You will probably need to move the holes in the firewall also.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23