random user submitted photo
inspection panel recommendations
2 posts
• Page 1 of 1
inspection panel recommendations
by N43WX » Sat Mar 06, 2021 5:58 am
Where would people recommend putting inspection panels on a Waiex B? Any must-have locations? Not looking to add a lot of unnecessary weight, but I'm sure there are some places where they would be helpful.
- N43WX
- Posts: 16
- Joined: Sun Jan 03, 2021 9:56 pm
Re: inspection panel recommendations
by Bryan Cotton » Sat Mar 06, 2021 9:43 am
I'd recommend the ones on the plans. Under the mixer, and under the aileron bellcranks.
If you had to replace the tailspring it might be handy to have one forward of where the mount bolts up. But you can always put one in later, so why do it proactively for something that may never be needed?
If you had to replace the tailspring it might be handy to have one forward of where the mount bolts up. But you can always put one in later, so why do it proactively for something that may never be needed?
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5495
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 91 guests
