Discussion for Waiex builders on specific plans page experience. These posts are limited to technical suggestions such as assembly order, challenges, or techniques related to specific plans pages.
by wingnut99 » Sun Oct 04, 2020 7:20 pm
The plans mention countersinking the washers that hold the plexiglass to the canopy frame. I have pointed wood bits that might work but I'm open for suggestions if anyone else has a proven technique. Thanks
-
wingnut99
-
- Posts: 102
- Joined: Wed Nov 14, 2018 12:32 am
by NWade » Sun Oct 04, 2020 11:55 pm
The countersink bits (as linked to by Direct C51) are the way to go. Put them on your speed debuting tool and just crank that by hand a few times. The plexi cuts quickly enough that you don’t need to chuck it into a drill.
Enjoy,
—Noel
-
NWade
-
- Posts: 527
- Joined: Mon Aug 08, 2011 3:58 pm
by wingnut99 » Mon Oct 05, 2020 9:27 am
Awesome! Thanks for your help. I'll order one today.
-
wingnut99
-
- Posts: 102
- Joined: Wed Nov 14, 2018 12:32 am
Return to Waiex Plans
Who is online
Users browsing this forum: No registered users and 13 guests