Secondary Ignition Trigger Cap

[crahen]

Greetings,
Do you all recommend using a certain type of locktite when installing the trigger cap? I was thinking that a green or blue might be a good idea?

[sonex1374]

The trigger cap will be loosened and adjusted several times early in the life of your AeroVee while you fine-tune the secondary ignition timing. Loctite on the cap screw during this process may be more trouble than help. However, once you get the timing spot-on, a light-strength threadlocker might give a little extra assistance in keeping the screw from loosening. In practice, I don't think these screws tend to vibrate out on tier own, but strange things happen.

Jeff

[crahen]

Thanks Jeff, that makes sense. It is right on the centerline and should have little vibration, but I think I may add just a small amount of green lcoktite for a little insurance.