Aero Injector

[Hasbenij]

I am converting a tail Onex to tri and the aero injector was mounted vertical. The prints show the aero injector on a 45% to make room for the nose wheel.
Has anyone ever mounted the injector horizontal? This would mean a 90% hose connecting to the intake tubes.
According to the manual, the injector can be mounted horizontally but not sure if the fuel flow would be restricted.

[Outlaw6]

Mine is horizontal (well maybe within 10degs). That's the stock way for an Aerovee Turbo w/ Aeroinjector.

[Hasbenij]

Great. Thanks for the quick reply.

[Onex107]

Mine is mounted with the slide horizontal and the fuel line entering at the side/front. That is straight down under the intake with a short piece of flex tubing. It's twisted a small amount so the throttle cable can clear the gear tube, with the air cleaner on the bottom. Check to be sure you can clear the bottom cowl.