13/16" thin wall deep socket for top plugs

[WesRagle]

Hi Guys,

I need to get a socket for the top plugs of my Hummel 2400. I need a 13/16" thin wall deep socket for the top plugs. These are normal aircraft style plugs so the socket needs to be deep enough to accommodate A/C type plugs.

I now have THREE plug sockets that don't work. Each claimed to be deep. One of the sockets is 6" long, but no deeper than the others. This is getting embarrassing:-)

Does anyone have a good part number and source for the socket I need?

Thanks,

Wes

[WesRagle]

I sent an email to Scott. He uses "CRAFTSMAN Standard (SAE) 1/2-in Drive 12-point 13/16-in Deep Socket". P/N 47527.

I'll get one.

Wes

[mike.smith]

I use something like this:
https://www.amazon.com/Briggs-Stratton-Spark-Wrench-5402K/dp/B0012W21JS/ref=sr_1_19_sspa?crid=ZMTWER36564X&keywords=13%2F16+spark+plug+wrench&qid=1566352609&s=gateway&sprefix=13%2F16+in+spar%2Caps%2C158&sr=8-19-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExWUE0TzlKQVhGUjk2JmVuY3J5cHRlZElkPUEwMzQwNjMwMjNMVVNKQ0pRNDNIJmVuY3J5cHRlZEFkSWQ9QTA1MjM5NjIzQzVXTlRNSDM3NlpFJndpZGdldE5hbWU9c3BfbXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

[bakerde36]

Hi Wes,
That is what I use is the Craftsman deep socket. I have a question what size is your prop? I think I am over pitched as I can only get about 3100 static and 3150 in cruise wot. My prop is Prince P Tip 54x50

I have 95 hours on my 2400 and love it, but still hope someday to have a little more horses.

[WesRagle]

HI Bakerde36,

Let me start a new thread where we can discuss the Hummel 2400 in general. Check out Hummel 2400 General Discussion.

Thanks,

Wes

[WesRagle]

Hi Wes,
That is what I use is the Craftsman deep socket.

Yep, that'll do it.



Thanks,

Wes