Exhaust Trimming

Discussion for builders, pilots, owners, and those interested in building or owning a Onex.

Exhaust Trimming

Postby WesRagle » Fri Aug 09, 2019 6:26 pm

Hi Guys,

How much exhaust pipe should I leave hanging below the firewall? Don't want too much, but don't want hot foot either :-)

Thanks,

Wes
Wes Ragle
Onex #89
Conventional Gear
Long Tips
Hummel 2400 w/Zenith Carb
Prince P Tip 54x50
First Flight 06/23/2020
42.8 Hrs. as of 10/30/21
WesRagle
 
Posts: 900
Joined: Fri Jan 05, 2018 12:35 pm
Location: Weatherford, Tx

Re: Exhaust Trimming

Postby mike.smith » Fri Aug 09, 2019 10:07 pm

I have very little in my Sonex. Lower photo:
http://www.mykitlog.com/users/display_l ... 051&row=67

I believe the theory is to have the exhaust in the negative pressure area of the cowl outlet, without being draggy in the slipstream.

No hot foot. Unless you cut off the exhaust above the bottom of the fuselage I don't think heat is an issue. Exhaust is being directed downward.
Mike Smith
Sonex N439M
Scratch built, AeroVee, Dual stick, Tail dragger
http://www.mykitlog.com/mikesmith
mike.smith
 
Posts: 1430
Joined: Tue Jan 29, 2013 8:45 pm

Re: Exhaust Trimming

Postby WesRagle » Sat Aug 10, 2019 9:33 am

Thanks Mike,

Makes sense. I'll just leave about an inch hanging out.

Wes
Wes Ragle
Onex #89
Conventional Gear
Long Tips
Hummel 2400 w/Zenith Carb
Prince P Tip 54x50
First Flight 06/23/2020
42.8 Hrs. as of 10/30/21
WesRagle
 
Posts: 900
Joined: Fri Jan 05, 2018 12:35 pm
Location: Weatherford, Tx


Return to Onex

Who is online

Users browsing this forum: No registered users and 19 guests