SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Wing Skin Up Drilling

Discussion for builders, pilots, owners, and those interested in building or owning a Sonex.
Post a reply

Wing Skin Up Drilling

Postby vernd » Thu Apr 11, 2019 5:23 pm

Hi all - quick question about updrilling wing skins.
I'm in the process of fitting wing skins to ribs. I have top and bottom aft skins drilled to #40. However I am running seriously short of silver clecos. Would there be any issue with updrilling the aft skins to #30 before fitting and drilling the leading edge skins to #40.
Appreciate any thots. Thanks....Vern
Vern Dueck - Innisfail, Alberta
Sonex 613 Slow Scratchbuild
Taildragger , Aerovee(turbo),
vernd
 
Posts: 44
Joined: Fri Mar 28, 2014 12:04 am
Location: Alberta, Canada
Top

Re: Wing Skin Up Drilling

Postby Bryan Cotton » Thu Apr 11, 2019 6:31 pm

Vern,
You probably could. Don't updrill where there are hinges, wing walk, or wing gap strips that also need to be drilled in.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Wing Skin Up Drilling

Postby vernd » Thu Apr 11, 2019 7:22 pm

Ok thanks Bryan - that makes perfect sense.
Never enough clecos…...
Vern Dueck - Innisfail, Alberta
Sonex 613 Slow Scratchbuild
Taildragger , Aerovee(turbo),
vernd
 
Posts: 44
Joined: Fri Mar 28, 2014 12:04 am
Location: Alberta, Canada
Top

Re: Wing Skin Up Drilling

Postby Rynoth » Thu Apr 11, 2019 8:05 pm

I think I actually did this myself for the same reason (clecoes). When I knew a part was fully fitted (ie top and bottom skins) I drilled SOME of the holes to #30 so I could fit coppers in and free up silvers. I didnt updrill everything until everything was at at least #40. Just make sure you come back later to ensure everything is updrilled before all is said and done.
Ryan Roth
N197RR - Waiex #197 (Turbo Aerovee Taildragger)
Knoxville, TN (Hangar at KRKW)
My project blog: http://www.rynoth.com/wordpress/waiex/
Time-lapse video of my build: https://www.youtube.com/watch?v=Q8QTd2HoyAM
User avatar
Rynoth
 
Posts: 1308
Joined: Fri Jul 26, 2013 1:32 pm
Location: Knoxville, TN
Top

Post a reply

Return to Sonex

Who is online

Users browsing this forum: No registered users and 14 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.