SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Enigma/IOX/shunt calibration

Discussion of Avionics and Flight Instruments. Such as: EFIS, EIS, GPS, COM, NAV, Antennas, Audio Panels, Steam Gauges
Post a reply

Enigma/IOX/shunt calibration

Postby Rick524 » Tue Dec 11, 2012 7:24 pm

Anyone have any experience / tips on calibrating an Enigma shunt?

Thanks!

Rick
Sonex524
Rick524
 
Posts: 159
Joined: Fri Jun 03, 2011 11:40 am
Top

Re: Enigma/IOX/shunt calibration

Postby normansemaj » Thu Jun 13, 2013 6:25 am

If you want to know anything about these then you should visit 3d prototyping as I also gain many information from these related to Enigma/IOX/shunt calibration.
normansemaj
 
Posts: 1
Joined: Thu Jun 13, 2013 6:20 am
Top

Re: Enigma/IOX/shunt calibration

Postby Mike53 » Thu Jun 13, 2013 7:26 am

Rick524 wrote:Anyone have any experience / tips on calibrating an Enigma shunt?

Thanks!

Rick
Sonex524

Hi Rick.
Have you tried the MGL forum.There will likely be more knowledge base over there. http://www.mglavionicsusers.org/
Cheers,
Mike
Mike
I know but one freedom, and that is the freedom of the mind.
Antoine de Saint-Exupery
Onex 080 now flying,Hummel 85HP ,Tri gear,GRT Mini X EFIS,and EMS,iFly 740 GPS
User avatar
Mike53
 
Posts: 486
Joined: Mon Jun 20, 2011 10:00 pm
Location: Dutton,Ontario , Canada
Top

Re: Enigma/IOX/shunt calibration

Postby Rick524 » Fri Jun 14, 2013 4:20 pm

Hi Mike, I've searched the MGL board and see others have had similar problems. Bob Meyers was
a big help to me. He didn't have any problems with his setup, so I know it can be done. I saw a post
somewhere that its a software problem. You get one shot at the setup and if you mess up it wont
calibrate again. There is a sequence of keystrokes and resets to go thru to get it calibrated....I saved the
message somewhere. I moved on to other things and will try again when I'm ready.

Rick
Sonex 524
Rick524
 
Posts: 159
Joined: Fri Jun 03, 2011 11:40 am
Top

Post a reply

Return to Avionics and Instruments

Who is online

Users browsing this forum: No registered users and 16 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.