accident N393SX

Discussion topics to include safety related issues and flight training.

accident N393SX

Postby WaiexN143NM » Sun Feb 10, 2019 7:43 pm

Hi all,
Today feb10 article on N393SXon http://www.kathrynsreport.com
reports LeRoy has serious injuries. Hope he is getting better and on the mend.

WaiexN143NM
Michael.
WaiexN143NM
 
Posts: 1206
Joined: Mon Sep 15, 2014 1:04 am
Location: palm springs CA

Re: accident N393SX

Postby XenosN42 » Mon Feb 11, 2019 10:24 am

-- Michael
OneX N169XE
author of the 'Flight Data Viewer'
XenosN42
 
Posts: 421
Joined: Thu Jul 24, 2014 4:45 pm
Location: PA, USA

Re: accident N393SX

Postby lpaaruule » Mon Feb 11, 2019 12:44 pm

If I'm reading the report right, it sounds like the cause of the accident was improperly assembled rocker arms.

Is this a more complicated portion of the overall assembly process?
Paul LaRue
Sonex N454EE Plans# 1509
Jabiru 3300
First Flight 12/21/2017
http://www.mykitlog.com/lpaaruule
User avatar
lpaaruule
 
Posts: 233
Joined: Wed Mar 26, 2014 6:33 pm
Location: SE Michigan

Re: accident N393SX

Postby sonex1374 » Mon Feb 11, 2019 2:14 pm

Paul,

The accident report is confusing in that it runs from the current accident right into the past accident from 3 yrs ago. In that old accident Leroy's engine lost power due to broken valve adjusters. He told us that a local "expert" helped him set up the valve train geometry and the adjusters were screwed nearly all the way out. Setting the adjusters is specifically addressed in the AeroVee manual (nearly all the way screwed in), and it's really unfortunate that this situation caused him to have an accident.

Jeff
Jeff Shultz
Sonex TD, 3300, AeroInjector
Kansas City, MO
http://www.sonex604.com
sonex1374
 
Posts: 605
Joined: Thu Mar 27, 2014 1:02 am

Re: accident N393SX

Postby mike.smith » Mon Feb 11, 2019 4:40 pm

lpaaruule wrote:If I'm reading the report right, it sounds like the cause of the accident was improperly assembled rocker arms.

Is this a more complicated portion of the overall assembly process?


Nope. It's very simple. A wrench, flat head screwdriver and a 0.006 feeler. It takes me about 15-20 minutes to do all my valve adjustments every 50 hours on the AeroVee.
Mike Smith
Sonex N439M
Scratch built, AeroVee, Dual stick, Tail dragger
http://www.mykitlog.com/mikesmith
mike.smith
 
Posts: 1430
Joined: Tue Jan 29, 2013 8:45 pm

Re: accident N393SX

Postby Bryan Cotton » Mon Feb 11, 2019 4:50 pm

But initially you have to shim them to the specified geometry. Was not hard, my 14 year old (at the time) did it.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: accident N393SX

Postby fastj22 » Mon Feb 11, 2019 9:32 pm

The Kathryns report shows two accidents. One in 2016, caused by engine failure (the result instigating the B-model conversion), and the one in 2018 after the B-model conversion and engine swap, due to drifting into trees on final.

John Gillis
SEL Private, Comm Glider, Tow pilot (Pawnee Driver)
Waiex N116YX, Jabiru 3300, Tail dragger,
First flight, 3/16/2013. 403 hours and climbing.
Home: CO15. KOSH x 5
Flying a B-Model Conversion (Super Bee Baby!)
User avatar
fastj22
 
Posts: 1594
Joined: Sun Aug 21, 2011 5:56 pm
Location: Mile High

Re: accident N393SX

Postby lpaaruule » Tue Feb 12, 2019 10:06 am

Thanks for the clarification everyone.

I hope LeRoy makes a full and complete recovery.
Paul LaRue
Sonex N454EE Plans# 1509
Jabiru 3300
First Flight 12/21/2017
http://www.mykitlog.com/lpaaruule
User avatar
lpaaruule
 
Posts: 233
Joined: Wed Mar 26, 2014 6:33 pm
Location: SE Michigan

Re: accident N393SX

Postby radfordc » Mon Feb 18, 2019 10:50 am

I can empathize with Leroy. My airport also has a tall tree just off the runway center line at the threshold. When you're slow on final the tree disappears under the nose of the plane and isn't very visible. When approaching from that end of the runway I always stayed higher than the tree and landed 1/3 of the way down the runway.
radfordc
 
Posts: 573
Joined: Fri Jun 03, 2011 9:39 am

Re: accident N393SX

Postby Gripdana » Tue Feb 19, 2019 11:33 am

Sounds like a short field landing over a 50 foot obstacle would be appropriate for those conditions. If it is not a short field you get the extra benefit of a long runway.
Dana Baker
Scratch Built
First Flight March 8, 2015
Sonex #1534 - N1534S "Aluminum Foil"
Aerovee-Dual Controls-Tail Dragger
Gripdana
 
Posts: 479
Joined: Fri Jan 11, 2013 5:59 pm


Return to Safety and Training

Who is online

Users browsing this forum: No registered users and 24 guests

cron