B&C LR3C OV/LV regulator

Discussion of aircraft electrical system design, construction, and problems.

B&C LR3C OV/LV regulator

Postby Darick » Wed Jan 30, 2019 8:22 pm

Is anybody using this regulator in place of the Sonex factory regulator? B&C ELECTRICAL-part number LR3C?

I'm still waiting to see if Bob Nuckolls voltage regulator that he discussed on episode 20-21 becomes available, which is supposed to be designed for the Sonex (and other similar) aircraft electrical systems.
Darick Gundy
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
User avatar
Darick
 
Posts: 496
Joined: Mon Aug 05, 2013 9:39 pm
Location: PA

Re: B&C LR3C OV/LV regulator

Postby gammaxy » Wed Jan 30, 2019 9:25 pm

I wouldn't think so. The manual says it is for "control and regulation of a B-type, wound-field alternator". The Aerovee uses permanent magnets instead.
Chris Madsen
Aerovee Sonex N256CM
Flying since September 2014
Build log: http://chrismadsen.org
gammaxy
 
Posts: 601
Joined: Wed Sep 04, 2013 9:31 am

Re: B&C LR3C OV/LV regulator

Postby Darick » Wed Jan 30, 2019 9:33 pm

Thanks very much...I already made a mistake on another item I need to return.
Darick Gundy
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
User avatar
Darick
 
Posts: 496
Joined: Mon Aug 05, 2013 9:39 pm
Location: PA


Return to Electrical System

Who is online

Users browsing this forum: No registered users and 1 guest