SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Matched hole magic

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.
Post a reply

Matched hole magic

Postby Sonex1517 » Mon May 13, 2013 7:56 pm

Well, I hadn't seen anyone post much about the matched hole construction, so here we go - photos to follow.

I started the fuselage this weekend with my sub kit that had matched hole parts. Wow!

It was like a big (expensive) erector set! I took out the parts, clecoed them to the fuselage this evening after doind some other prep work over the weekend. The matched holes in the channel line up perfectly with the holes in the side fuselage skin. Some clecoes and voila! It looks like a fuselage in the making....

Off to take a few photos.....back shortly....


Robbie
Sonex 1517
You guessed it - workin' on the fuselage!

Sent from my iPad using Tapatalk HD
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX
Top

Re: Matched hole magic

Postby Sonex Foundation » Mon May 13, 2013 8:15 pm

a few photos - I know they aren't exciting, but I can only imagine the amount of fabrication and pilot drilling that scratch builders or non matched hole kit builders must go through to get here. These are F26-01R, F26-02R, F26-03R, F26-04R, and F26-05R as shown on page F25 in their positions on the right fuselage skin. One former is at the upped edge just for reference.

Lots of fabrication to do but this is a huge time saver and a welcome addition to the kit and sub kits!!
Attachments
IMG_2689.jpg
IMG_2689.jpg (163.54 KiB) Viewed 8683 times
IMG_2688.jpg
IMG_2688.jpg (168.59 KiB) Viewed 8683 times
IMG_2687.jpg
IMG_2687.jpg (146.53 KiB) Viewed 8683 times
IMG_2686.jpg
IMG_2686.jpg (136.73 KiB) Viewed 8683 times
IMG_2684.jpg
IMG_2684.jpg (151.05 KiB) Viewed 8683 times
Robbie Culver
President
Sonex Builders and Pilots Foundation
http://www.Sonexfoundation.com
Sonex Foundation
 
Posts: 158
Joined: Fri May 10, 2013 9:20 pm
Top

Re: Matched hole magic

Postby N111YX » Mon May 13, 2013 10:42 pm

That aint fair...;)
Kip

2010 Waiex 0082 (first flight May 2010)
Jabiru 3300 #1637 and #3035
Dynon D-180
Becker radios
Garmin GDL 82 ADS-B
1175 hours
48 states visited
Based near Atlanta

Also flying a...
2000 Kolb Firestar II, Rotax 503, 575 hours
N111YX
 
Posts: 711
Joined: Fri Jun 03, 2011 9:43 am
Location: Atlanta, GA USA
Top

Re: Matched hole magic

Postby N1906R » Tue May 14, 2013 7:46 pm

Cheater
Jim Reichard
Sonex814
N1906R
3300 Jab
Standard Gear
N1906R
 
Posts: 28
Joined: Sun Dec 23, 2012 7:56 pm
Top

Re: Matched hole magic

Postby fastj22 » Tue May 14, 2013 10:21 pm

Just ain't fair. I always get in the slowest line at the grocery store too.

John Gillis
SEL Private, Comm Glider, Tow pilot (Pawnee Driver)
Waiex N116YX, Jabiru 3300, Tail dragger,
First flight, 3/16/2013. 403 hours and climbing.
Home: CO15. KOSH x 5
Flying a B-Model Conversion (Super Bee Baby!)
User avatar
fastj22
 
Posts: 1594
Joined: Sun Aug 21, 2011 5:56 pm
Location: Mile High
Top

Matched hole magic

Postby Sonex1517 » Wed May 15, 2013 9:46 pm

Jim....you had a point? :-)


Robbie
Sonex 1517

Sent from my iPad using Tapatalk HD
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX
Top

Re: Matched hole magic

Postby Sonex1462 » Fri May 17, 2013 11:15 pm

That is cool. You will probably finish your fuselage in no time. I agree, not fair.
Think about all the measuring and drilling you will miss out on. Have fun and enjoy

John
Sonex 1462
John Stewart
Sonex 1462
Kit, Aerovee, Tri Gear, ST Controls

Website: http://stewartaircraft.net
Sonex1462
 
Posts: 135
Joined: Thu May 16, 2013 8:08 pm
Top

Matched hole magic

Postby Sonex1517 » Sun Jun 09, 2013 6:56 pm

I have reached the conclusion (and I am NOT complaining!) that this may be cheating. I just completed page SNX-F24 in about twenty minutes. Most builder web sites I read mention how critical it was to make the cross tie box assembly square.

With the matched holes it already is.

My brother was building an RV, and refers to matched hole construction as a "competitive advantage" - I think I agree.

Robbie
Sonex 1517

Sent from my iPad using Tapatalk HD
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX
Top

Re: Matched hole magic

Postby fastj22 » Sun Jun 09, 2013 10:53 pm

Cheater.

John Gillis
SEL Private, Comm Glider, Tow pilot (Pawnee Driver)
Waiex N116YX, Jabiru 3300, Tail dragger,
First flight, 3/16/2013. 403 hours and climbing.
Home: CO15. KOSH x 5
Flying a B-Model Conversion (Super Bee Baby!)
User avatar
fastj22
 
Posts: 1594
Joined: Sun Aug 21, 2011 5:56 pm
Location: Mile High
Top

Matched hole magic

Postby Sonex1517 » Mon Jun 10, 2013 8:17 am

It's Jeremy's fault!


Robbie
Sonex 1517

Sent from my iPad using Tapatalk HD
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX
Top

Next
Post a reply

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 66 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.