billy's plans built sonex 1735

[Rofomoto]

This is number9rib bell crank. It clears lightning hole

Here is other side ...hits hole

Measurements correct from rib end.
??? Thanx billy

[Rofomoto]

Maybe I’m not thinking correct. Because they are opposite and lightning hole is bent the same on both.

[dbdevkc]

Something is wrong there. I'll take a look at mine and take some photos.

[Rofomoto]

Something is wrong there. I'll take a look at mine and take some photos.

Thanx. I’m not even sure if travel goes that fare. Billy

[dbdevkc]

I'm not sure how much the travel really is, but with the bellcrank hitting the rib like you show, there is something wrong with the installation/measurements.

Here are some photos of my #9 aft ribs:

RIGHT #9 Aft Rib:
https://photos.app.goo.gl/8MLFQm23KdF7kXip7

LEFT #9 Aft Rib:
https://photos.app.goo.gl/nPxBQoaXAuYLs13o8

Below is a photo of the two of them side by side.
[img]IMG_7592.JPG[/img]

[Rofomoto]

Thanx Kevin. Just another dumb mistake by me. Bell cranks were on the wrong side. I made them a while ago and forgot they were different. Thanx again billy

[Rofomoto]

[Rofomoto]

[Sonex1517]

Is that the Corvair engine mount?


Sent from my iPhone using Tapatalk

[Rofomoto]

Is that the Corvair engine mount?

Yes it is.

Sent from my iPhone using Tapatalk