Question for Canadian Builders

[Rick524]

Where did you mount your data plate? Cars say to rear of passenger entrance.
Would under the horizontal stab pass?

Thanks.
Rick
Sonex 524

[Friesen5]

I mounted mine under the horizontal stab, on the left pilot side. Mine was completed in 2007 and no issues back then.

Mervin Friesen
C-FMNX
Sonex 122

[Rick524]

Thanks Mervin. That's where most planes I've seen have them. The regs
can be interpreted different ways. I'll go with that.

Rick
C-GRIX
Sonex 524

[Gordon]

Data Plate Location

I mounted mine even with the leading edge of the horizontal stab and about 5" below on the pilots side of the fuse skin. That is the same spot I used on my previous RV's and it was accepted by the MD-RA.

Gordon......Onex C-IODB...Hummel 2400

[Sonex1384]

I'm a little late to chime in but mine is the same. Below leading edge of left stab leading edge.