Incident Sonex N1611S

Discussion topics to include safety related issues and flight training.

Re: Incident Sonex N1611S

Postby andrewp » Mon Feb 26, 2018 1:05 pm

Yes, outstanding work getting it down sir. Well done. Also, this is making light of a serious situation, but coolest place to make a force landing ever as far as I am concerned.

AP
#618
andrewp
 
Posts: 213
Joined: Mon Oct 14, 2013 11:10 pm

Re: Incident Sonex N1611S

Postby lgsievila » Tue Feb 27, 2018 1:26 pm

As others have mentioned, failures happen. I found an old picture of the Lycoming IO-360 that was in our 1971 Piper Arrow. There were about 200 hours SMOH and it was running fine until it didn't. Without warning just after levelling off at 7,000 ft. it let go.
In the picture you can see the end of the connecting rod with a bolt missing and it looked like that bolt broke as we found part of the bolt in the crankcase. What you can't see is the other side of that rod where it broke with the end cap still attached to the broken part of the rod.

My partner Don was flying it at the time and he was working on his Instrument Rating with his instructor on board. The windscreen was completely covered with oil so he could not see anything in front of him-only a little out the side window. He continued to fly the plane and landed in the sage brush about 7 miles Northwest of KCPR(Casper, WY) with minor damage to the airframe. Other than the engine and prop which was damaged by metal from the engine coming apart, the only damage was one linkage arm that was torn loose from the main gear to a fiberglass landing gear cover. N1939T flew again about 9 months later.





Image
Loren Sievila
Conventional Gear Onex33
CAMit 2200
Dynon Skyview
lgsievila
 
Posts: 161
Joined: Fri Feb 19, 2016 12:54 am

Previous

Return to Safety and Training

Who is online

Users browsing this forum: No registered users and 1 guest