Seat cushions and upholstery

Discuss painting, polishing, or painting vs polishing.

Re: Seat cushions and upholstery

Postby kevinh » Fri Sep 01, 2017 2:53 pm

Btw - this thread prompted me to order my seat foam. And I noticed that the place I selected has a sale right now on certain sizes: www.sunmatecushions.com
Taildragger Waiex in progress, tail done, wings done, about to mate wings to fuse,
then cowl, canopy, paint (photos): flush rivets, turbo aerovee, acro ailerons
(I built my RV7A and happily flew it for about 500 hrs)
User avatar
kevinh
 
Posts: 372
Joined: Mon Feb 23, 2015 10:46 pm
Location: San Mateo, CA

Re: Seat cushions and upholstery

Postby kevinh » Sat Sep 02, 2017 1:55 pm

Don just asked me a question about the foam I listed. I figured I'd paste my reply here for future searchers/discussion. (Though I know virtually nothing on this topic - I'm copying a bit of what some RV friends did)

---

Sure thing. Here's what I ordered (somewhat limited based on what was on sale):

22"x36" Pudgee - 1/2" (8 lbs)
$138.65 USD 1 $138.65 USD
Discounted Overstock 32"x37" SunMate - Medium-soft / 2" (8 lb)
$61.45 USD 1 $61.45 USD
Discounted Overstock 32"x37" SunMate - Medium / 1.25" (5 lb)
$38.87 USD 1 $38.87 USD
Discounted Overstock 32"x37" SunMate FRG - Medium / 1" (4 lb)

From my notes:

22” (ish) high back
2” of SunMate Medium-soft + extra sun mate medium used for lumbar support

22” deep bottom
.5” Pudgee
1.25” SunMate Medium
Total of 1.75”
Or add 1” of extra booster for total of 2.75”

32” wide


The Pudgee stuff is optional (and expensive) as a top layer but it feels really cool (they sent me a big pack of free samples). On their site they have a page which based on your weight and preference can specify what firmness is recommended. Based on some RV friends who used in their RV I opted for medium-soft on the back and medium on the bottom (I'm 175 lbs).
Taildragger Waiex in progress, tail done, wings done, about to mate wings to fuse,
then cowl, canopy, paint (photos): flush rivets, turbo aerovee, acro ailerons
(I built my RV7A and happily flew it for about 500 hrs)
User avatar
kevinh
 
Posts: 372
Joined: Mon Feb 23, 2015 10:46 pm
Location: San Mateo, CA

Re: Seat cushions and upholstery

Postby Bryan Cotton » Fri Dec 28, 2018 10:47 am

Last night I watched one YouTube video, read the manual, and taught myself how to use the Singer sewing machine. This task is on my punch list.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Seat cushions and upholstery

Postby Bryan Cotton » Sat Feb 09, 2019 2:48 pm

A quick cross post for future reference: page 109 of my thread starts my upholstery adventures.
viewtopic.php?f=39&t=578&start=1080

Before this cushion, I practiced on scrap. Then I took in the waist of my jeans. Been working on losing weight to improve useful load. Then I altered two pairs of new cargo pants for my younger son as the waist was either too tight or loose in the available sizes.

Welding, riveting, gluing, sewing - all different aspects of the same thing.

I found this video helpful.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Seat cushions and upholstery

Postby Rynoth » Sat Feb 09, 2019 6:53 pm

Bryan, that's a great video. Makes we want to buy a sewing machine.....
Ryan Roth
N197RR - Waiex #197 (Turbo Aerovee Taildragger)
Knoxville, TN (Hangar at KRKW)
My project blog: http://www.rynoth.com/wordpress/waiex/
Time-lapse video of my build: https://www.youtube.com/watch?v=Q8QTd2HoyAM
User avatar
Rynoth
 
Posts: 1308
Joined: Fri Jul 26, 2013 1:32 pm
Location: Knoxville, TN

Re: Seat cushions and upholstery

Postby Bryan Cotton » Sat Feb 09, 2019 7:25 pm

The primary purpose of the hobby is to collect tools.

When I was newly married or maybe engaged I bought this machine for my wife as a gift because she said she liked to sew. I had my mom pick it out down in Tennessee as she has been into it for years. I think she used it once and then never again. She said it had thread tension problems. I found the needle was installed backwards. The thing runs great. Good to see it in use after two decades of storage.
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5496
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Seat cushions and upholstery

Postby lstinthot » Sun Feb 10, 2019 1:46 am

I bought my wife a new embroidery machine, she thinks I bought it for her.
Scratch building #1604
Tail dragger
Thinking Turbo Aerovee
lstinthot
 
Posts: 103
Joined: Fri Aug 03, 2012 12:11 pm

Re: Seat cushions and upholstery

Postby sonex1566 » Mon Feb 11, 2019 7:46 am

This is my chance to shine as a Martha Stewart wannabe....I borrowed my Mother in law's embroidery machine. To cut a long story short, many, many hours later, I used every swear word I know at least twice over. I finished my upholstery a couple of months back. The racing stripes are to make up for lost speed due to my fat bum!
Attachments
1549885448408-1058479810.jpg
Richard
Scratch build Sonex
Std gear, dual control
Jabiru 3300, Sensenich prop
19-8776
1st Flight 25th June 2019. 170 hrs so far.....
http://www.sonex1566.com
sonex1566
 
Posts: 94
Joined: Thu Jun 21, 2018 6:11 am

Previous

Return to Finish methods

Who is online

Users browsing this forum: No registered users and 4 guests