SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

Installing rudder pedals before fuel tank

Discussion for Sonex builders on specific plans page experience. These posts are limited to technical suggestions such as assembly order, challenges, or techniques related to specific plans pages.
Post a reply

Installing rudder pedals before fuel tank

Postby kevinh » Fri Jul 14, 2017 10:34 pm

Hi ya'll,

Anyone see a problem with putting the pedals in before permanently installing the fuel tank? So far I'm not seeing anything...

Kevin
Taildragger Waiex in progress, tail done, wings done, about to mate wings to fuse,
then cowl, canopy, paint (photos): flush rivets, turbo aerovee, acro ailerons
(I built my RV7A and happily flew it for about 500 hrs)
User avatar
kevinh
 
Posts: 372
Joined: Mon Feb 23, 2015 10:46 pm
Location: San Mateo, CA
Top

Re: Installing rudder pedals before fuel tank

Postby Bryan Cotton » Sat Jul 15, 2017 5:23 am

That is how I did it!
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5489
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77
Top

Re: Installing rudder pedals before fuel tank

Postby sonex892. » Sat Jul 15, 2017 5:27 am

I reckon you'll be right. Do it while you can.

I recently installed toe brakes and removed the pedals just to weld on brackets for the master cylinders. Removing and re installing the pedals is a bitch of a job.
Steve
Lazair kit 1981 sold
Sonerai 2LS plansbuilt 2003 sold
Sonex kit 2010
Sonerai 2LS project rotax 912
User avatar
sonex892.
 
Posts: 414
Joined: Tue Oct 27, 2015 12:32 am
Top

Re: Installing rudder pedals before fuel tank

Postby kevinh » Sat Jul 15, 2017 12:01 pm

Thanks guys - as usual you helped a lot!
Taildragger Waiex in progress, tail done, wings done, about to mate wings to fuse,
then cowl, canopy, paint (photos): flush rivets, turbo aerovee, acro ailerons
(I built my RV7A and happily flew it for about 500 hrs)
User avatar
kevinh
 
Posts: 372
Joined: Mon Feb 23, 2015 10:46 pm
Location: San Mateo, CA
Top

Post a reply

Return to Sonex Plans

Who is online

Users browsing this forum: No registered users and 6 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.