ACV-G01-10 gascolator

[bvolcko38]

Where does one purchase the above mentioned gascolator?

[kevinh]

Where does one purchase the above mentioned gascolator?

Aircraft spruce.

Sent from my Nexus 6P using Tapatalk

[Sonex1517]

Where does one purchase the above mentioned gascolator?

http://www.aircraftspruce.com/pages/ep/gascolators/usher.php

This is the one many Sonex builders use.

[builderflyer]

Just don't buy the ACS gascolator...........note Sonex Revision 10.19.15............as previously reported, you'll want the Usher gascolator. I write from personal experience having had to pull the ACS product from my Sonex to replace it with the Usher. More details are available if anyone cares to know why.

Art,,,,,,,,,,,,,,,,,,,Sonex taildragger #95,,,,,,,,,,,,,,,,,,,Jab3300 #261

[Issak]

I have a brand new one that I do not intend to use. It came with the kit I bought. If you want it I can ship it to you for free and it would be $60.

[Bruce593SX]

me too... dont need no stinkin gascolator

[wlarson861]

don't use the gascolator. use a filter and save yourself the burps. Ask me how i know.

[bvolcko38]

You guys that eliminated gascolator...do you have photos or drawings of your filter installation?

[wlarson861]

I don't have a picture but it is simply on the engine side of the firewall on the fuel line. Then into a stainless steel braided hose to the AeroCarb. Make sure the entire fuel run is downhill with no part of the fuel line lower than the carb inlet. I also used pipe insulation from Menard's homebuilt supply to wrap the fuel line and filter. Covered that with aluminum heat duct tape. burps eliminated! I change the insulation and clean the filter at annual. never found anything in the filter when I opened it.

[bvolcko38]

What fuel filter are you using?