SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

flap handle grip dimensions (for 3d printing)

Discussion for builders, pilots, owners, and those interested in building or owning a Sonex.
Post a reply

flap handle grip dimensions (for 3d printing)

Postby kevinh » Tue May 16, 2017 7:20 pm

Hi ya'll,

Alas I've been out of the country and unable to work on my Waiex until June. However, I've been experimenting with 3d printing and would like to make at least _some_ plane progress. So I'm going to try printing a flap handle in a wood/PLA mix. Unfortunately I don't have my plans with me. Would someone be willing to tell me the dimensions of the aluminum bar stock and the length of the portion that is bent over in the top?

Kevin
Taildragger Waiex in progress, tail done, wings done, about to mate wings to fuse,
then cowl, canopy, paint (photos): flush rivets, turbo aerovee, acro ailerons
(I built my RV7A and happily flew it for about 500 hrs)
User avatar
kevinh
 
Posts: 372
Joined: Mon Feb 23, 2015 10:46 pm
Location: San Mateo, CA
Top

Re: flap handle grip dimensions (for 3d printing)

Postby Darick » Mon May 22, 2017 9:33 am

Kevin, the bar is 3/16 thick, 1" wide. I just measured my bent over section, which is covered by a grip, and it measures about 4-1/2". If I can find that part in the plans, I'll confirm that later.
Darick
Darick Gundy
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
User avatar
Darick
 
Posts: 496
Joined: Mon Aug 05, 2013 9:39 pm
Location: PA
Top

Post a reply

Return to Sonex

Who is online

Users browsing this forum: No registered users and 9 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.