Scott's Sonex 1629 - N629SX

Use this area to create a thread with photos from your build.

Re: Scott's Sonex 1629 - N629SX

Postby ScottM-Sonex1629 » Fri Sep 30, 2016 7:04 pm

Phase 1 flight testing continues...and I've also started a new project! Ever since completing the Sonex my wife mentioned it was too bad the plane isn't big enough for the whole family. Read my blog to find out more about the project!

http://scottm-sling4.blogspot.com/
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Scott's Sonex 1629 - N629SX

Postby ScottM-Sonex1629 » Sun Oct 30, 2016 8:06 pm

Today another milestone in my Sonex flight testing...Phase 1 is complete! Entered the requisite information and sign off in my logbook.

My son and I have also completed the horizontal stabilizer for our new project the Sling 4. If Sonex would offer a 4 seater I'm sure that would have been highly considered. I will say the Sling takes match hole construction to a new level. No updrilling...and it still uses blind rivets so I don't have to buck rivets like the RV-10 I was considering.
Last edited by ScottM-Sonex1629 on Sun Mar 18, 2018 7:35 pm, edited 1 time in total.
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Scott's Sonex 1629 - N629SX

Postby Bryan Cotton » Sun Oct 30, 2016 9:39 pm

Very cool Scott! Especially getting your son riveting!
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
User avatar
Bryan Cotton
 
Posts: 5501
Joined: Mon Jul 01, 2013 9:54 pm
Location: C77

Re: Scott's Sonex 1629 - N629SX

Postby ScottM-Sonex1629 » Sun Mar 18, 2018 7:33 pm

Well it looks like all my photobucket picture links are gone..

So here is a new video I shot a few weeks ago practicing crosswind landings in the pattern.

https://youtu.be/fk-DCXkMyhk
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Scott's Sonex 1629 - N629SX

Postby daleandee » Sun Mar 18, 2018 10:31 pm

ScottM-Sonex1629 wrote:So here is a new video I shot a few weeks ago practicing crosswind landings in the pattern.

https://youtu.be/fk-DCXkMyhk


Good video with commentary. Enjoyed the ride along.

Thanks!

Dale Williams
N319WF @ 6J2
Myunn - "daughter of Cleanex"
120 HP - 3.0 Corvair
Tail Wheel - Center Stick
Signature Finish 2200 Paint Job
171.9 hours / Status - Flying
Member # 109 - Florida Sonex Association
Latest video: https://www.youtube.com/watch?v=1VP7UYEqQ-g
Image
User avatar
daleandee
 
Posts: 877
Joined: Fri Feb 01, 2013 6:14 pm

Re: Scott's Sonex 1629 - N629SX

Postby Darick » Tue Mar 20, 2018 8:56 pm

In the cross wind landing video, you were adjusting the intercom. Is that the MGL V6 and if so, could you tell us what settings you are using? I'm not yet satisfied with my adjustments.
Thanks
Darick Gundy
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
User avatar
Darick
 
Posts: 496
Joined: Mon Aug 05, 2013 9:39 pm
Location: PA

Re: Scott's Sonex 1629 - N629SX

Postby ScottM-Sonex1629 » Thu Mar 29, 2018 4:14 pm

Hi Darrick,

Funny you should ask...I’m not happy with V6 settings either. It seems like when I get it to sound right, the next flight it’s different. This is my 2nd V6 com radio...

Do you use ANR headsets?

MGL says to use the VOX setting with ANR’s but I didn’t find that to work.

Right now I have Dave Clark with Headsets Inc retrofit ANR kit.

VOGAD is set to HIGH, about the 3-4 range
Microphone is at -4.5 dB
Squelch is at +10
Scott Meyer
Sonex 1629 - Sold...9/2019
ScottM-Sonex1629
 
Posts: 441
Joined: Sun Aug 11, 2013 10:00 pm
Location: Dublin, Ohio (MRT)

Re: Scott's Sonex 1629 - N629SX

Postby sonex1374 » Thu Mar 29, 2018 8:45 pm

Scott & Darrick,

I also use an MGL V-6 Comm radio, and had a rough time getting the radio to work satisfactory. I settled on the following settings (see video link below) as the best compromise. I was so dissatisfied that I seriously considered replacing the radio. However, last year I switched to a Clarity Aloft Halo headset (in-ear style headset). The Halo are wonderful, and sound great with the V-6. It was the best decision I've made recently, and a lot cheaper than replacing the comm. Consider trying that - I think you'll like it.

https://youtu.be/eBvz5Tqo87E

Jeff
Jeff Shultz
Sonex TD, 3300, AeroInjector
Kansas City, MO
http://www.sonex604.com
sonex1374
 
Posts: 605
Joined: Thu Mar 27, 2014 1:02 am

Re: Scott's Sonex 1629 - N629SX

Postby daleandee » Thu Mar 29, 2018 10:14 pm

sonex1374 wrote:However, last year I switched to a Clarity Aloft Halo headset (in-ear style headset). The Halo are wonderful, and sound great with the V-6. It was the best decision I've made recently, and a lot cheaper than replacing the comm.


While I use the Flightline 760 I will also confess that it was difficult to get good audio in or out using a set of passive David Clark or even Lightspeed with ANR. The purchase of a set of Clarity Aloft made a tremendous difference and IMHO are well worth the purchase price.

BTW ... I see Jeff sometimes uses a set of Lightspeed QFR Solo and I have a set that I use for passengers. They work well with the Flightline 760 intercom for passengers.

Dale Williams
N319WF @ 6J2
Myunn - "daughter of Cleanex"
120 HP - 3.0 Corvair
Tail Wheel - Center Stick
Signature Finish 2200 Paint Job
171.9 hours / Status - Flying
Member # 109 - Florida Sonex Association
Latest video: https://www.youtube.com/watch?v=1VP7UYEqQ-g
Image
User avatar
daleandee
 
Posts: 877
Joined: Fri Feb 01, 2013 6:14 pm

Re: Scott's Sonex 1629 - N629SX

Postby Darick » Fri Mar 30, 2018 3:43 pm

ScottM-Sonex1629 wrote:Do you use ANR headsets?

MGL says to use the VOX setting with ANR’s but I didn’t find that to work.

Right now I have Dave Clark with Headsets Inc retrofit ANR kit.

VOGAD is set to HIGH, about the 3-4 range
Microphone is at -4.5 dB
Squelch is at +10


Scott, Thanks for the info...I have DC headset, no ANR. I will try the suggestions by you and Jeff S.
Darick Gundy
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
User avatar
Darick
 
Posts: 496
Joined: Mon Aug 05, 2013 9:39 pm
Location: PA

Previous

Return to Photo Album

Who is online

Users browsing this forum: No registered users and 7 guests