Ruddervator horns

[tommywatson]

Hello Waiex people,
I'm about to bend my control horns, I was wonrding if the wisdome here could tell me if this is the right direction? https://goo.gl/2xS5gi
I've looked at the plans and they say "down" and this would be correct but I can't match this up with what I'm seeing on the 3 view underneath...

Thanks!

[Bryan Cotton]

Tommy,
That was how I did mine. Scroll down a bit on my page 3:
viewtopic.php?f=39&t=578&hilit=Ruddervator&start=20

[tommywatson]

Thanks Bryan, I missed that picture when I scrolled through last night.

Appreciated!

[John Usher]

Tommy,
Hope this helps:

[tommywatson]

Yup, thanks John!

[Area 51%]

Watch out for the angle. Seems to me there was an update on the service bulletin. You will be under-sized unless your plans have been changed.

[kevinh]

yep. plans say 15 deg, but the update corrects it to 20 deg. Definitely worth going through all of the bulletins on the website and marking up your plans in advance.

[tommywatson]

Thanks guys, I checked the updates for my kit, I bent everything to 20 degrees, turned the first set of hockey sticks into scrap by over tweaking them to about 25 degrees, the second set worked out ;-)

[EineBeBoP]

Watch out for the angle. Seems to me there was an update on the service bulletin. You will be under-sized unless your plans have been changed.

D'oh. Just bent these to the 15 in the plans yesterday. Looks like its back to the shop to bend them a bit further.