ELT panel and antenna location

Use this area for aviation related general discussions, newsworthy items, and non model specific topics.

ELT panel and antenna location

Postby kevinh » Mon Jun 13, 2016 2:41 pm

Hi ya'll,

Before I drill holes I'm requesting feedback :lol:. Two questions for the more experienced:

1) I'm thinking about installing the ELT panel on the bottom side of the right frontmost turtledeck former. It seems like it should be accessible if needed and not prone to accidental pressing. Does this seem reasonable to you? Here's a pict, thinking of putting it where my thumb is pointing:

Image

2) On my RV I did the common/pretty approach of putting the ELT antenna under a fairing. However, now that ELTs have 406MHz it might actually be useful and out of caution I'd like to put the antenna externally. Just in front of the #4 turtledeck former is the only reasonable place I can find. Any other ideas?

Image
In the perfect world I'd be able to sit in the plane and mock this up, but I'm building in a very small shop and one bay in a garage. To keep productivity high I'm trying to accomplish everything I can in the shop before moving the aft fuse to the garage for eventual final assembly so thinking about doing the ELT installation now.
Taildragger Waiex in progress, tail done, wings done, about to mate wings to fuse,
then cowl, canopy, paint (photos): flush rivets, turbo aerovee, acro ailerons
(I built my RV7A and happily flew it for about 500 hrs)
User avatar
kevinh
 
Posts: 372
Joined: Mon Feb 23, 2015 10:46 pm
Location: San Mateo, CA

Re: ELT panel and antenna location

Postby saddler » Mon Jun 13, 2016 4:09 pm

That's exactly where I installed my ELT remote switch. Works just fine
Sean Saddler
Troy, OH
Waiex #165
First Flight 10/16/2015
https://www.facebook.com/Waiex165?ref=hl
saddler
 
Posts: 55
Joined: Tue Mar 25, 2014 9:14 am

Re: ELT panel and antenna location

Postby GordonTurner » Mon Jun 13, 2016 7:06 pm

I'm not so far along, but somewhere between or just in front of the v tail is where I thought might be the best place. Should work great if right side up, and maybe won't be crushed and still work if inverted. I'm looking at the ARTEX unit with gps broadcast, so I agree, the 408 might actually be useful if you ever need it.

Gordon
Waiex 158 New York. N88YX registered.
3.0 Liter Corvair built, run, and installed.
Garmin panel, Shorai LiFePo batteries.
GordonTurner
 
Posts: 669
Joined: Tue Feb 21, 2012 1:14 am
Location: NY, NY

Re: ELT panel and antenna location

Postby mike.smith » Mon Jun 13, 2016 7:07 pm

saddler wrote:That's exactly where I installed my ELT remote switch. Works just fine


And where I installed mine, too. Works just fine. Easily seen.
Mike Smith
Sonex N439M
Scratch built, AeroVee, Dual stick, Tail dragger
http://www.mykitlog.com/mikesmith
mike.smith
 
Posts: 1430
Joined: Tue Jan 29, 2013 8:45 pm

Re: ELT panel and antenna location

Postby WaiexN143NM » Tue Jun 14, 2016 12:01 am

Hi kevin,
Yep thats a good spot! Thats where we put ours. We have a ELT tecnologies 406 mhz elt , antenna is a shark fin type mounted between the v tails. Couldnt have metal around it so we made the fairing out of fiberglass.
Someday need to head south to San Mateo to see your project. Im just up the road in SF for the summer.
Looks like your'e really making progress. U'r giving bryan a run for his money!
WaiexN143NM
Michael
WaiexN143NM
 
Posts: 1207
Joined: Mon Sep 15, 2014 1:04 am
Location: palm springs CA

Re: ELT panel and antenna location

Postby kevinh » Wed Jun 15, 2016 1:24 pm

Thanks all! And yep Michael you are welcome anytime (I'm just off of 280 and 92).
Taildragger Waiex in progress, tail done, wings done, about to mate wings to fuse,
then cowl, canopy, paint (photos): flush rivets, turbo aerovee, acro ailerons
(I built my RV7A and happily flew it for about 500 hrs)
User avatar
kevinh
 
Posts: 372
Joined: Mon Feb 23, 2015 10:46 pm
Location: San Mateo, CA


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 4 guests