random user submitted photo
Ryan from Louisiana
5 posts
• Page 1 of 1
Ryan from Louisiana
by crhenry94 » Tue Jun 07, 2016 5:07 pm
Hey guys,
I've been researching homebuilts for awhile now and finally decided on the Sonex. This will be my first plan, so I'm very excited to start! I'll probably be a nervous wreck, reorganizing the shop and getting everything as ready as it can possibly be for all the uncertainty, headache, and thrill until the kit finally arrives. I'm sure I'll be leaning on this board heavily over the build process, so I hope you guys can put up with me!
I've been researching homebuilts for awhile now and finally decided on the Sonex. This will be my first plan, so I'm very excited to start! I'll probably be a nervous wreck, reorganizing the shop and getting everything as ready as it can possibly be for all the uncertainty, headache, and thrill until the kit finally arrives. I'm sure I'll be leaning on this board heavily over the build process, so I hope you guys can put up with me!
- crhenry94
- Posts: 1
- Joined: Tue Jun 07, 2016 4:53 pm
Re: Ryan from Louisiana
by Bryan Cotton » Tue Jun 07, 2016 6:02 pm
Welcome aboard Ryan!
Bryan Cotton
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
Poplar Grove, IL C77
Waiex 191 N191YX
Taildragger, Aerovee, acro ailerons
dual sticks with sport trainer controls
Prebuilt spars and machined angle kit
Year 2 flying and approaching 200 hours December 23
-
Bryan Cotton - Posts: 5537
- Joined: Mon Jul 01, 2013 9:54 pm
- Location: C77
Re: Ryan from Louisiana
by wlarson861 » Wed Jun 08, 2016 12:03 am
Welcome to the board and good luck with your build.
This is the place to go for all the questions you will have. Don't ever be afraid to ask the dumb questions as there are no dumb questions. We have all been where you are now and someone will have an answer. Those of us all ready flying stick around here to help and I usually learn a thing or two in the process. I could not have finished with out the help I received here and the previous Yahoo board, so relax and have a good time turning tin into art! Just remember that to eat an elephant you have to do it one bite at a time.
This is the place to go for all the questions you will have. Don't ever be afraid to ask the dumb questions as there are no dumb questions. We have all been where you are now and someone will have an answer. Those of us all ready flying stick around here to help and I usually learn a thing or two in the process. I could not have finished with out the help I received here and the previous Yahoo board, so relax and have a good time turning tin into art! Just remember that to eat an elephant you have to do it one bite at a time.
Bill Larson
N861SX
Sonex, polished, tail wheel, Generation 4 Jabiru 3300
N861SX
Sonex, polished, tail wheel, Generation 4 Jabiru 3300
- wlarson861
- Posts: 499
- Joined: Wed Dec 05, 2012 11:41 pm
Re: Ryan from Louisiana
by Darick » Sat Jun 11, 2016 10:24 pm
Hello and welcome from PA.
Darick Gundy
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
Sonex #1646
N417DG
Taildragger, Aerovee, center stick, Prince P-Tip Prop
MGL E1, F2, V6 radio, Sandia Xponder, Reserve lift indicator (AOA), iFly 520
First flight! 10/21/2017
-
Darick - Posts: 496
- Joined: Mon Aug 05, 2013 9:39 pm
- Location: PA
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 47 guests
