3300 static rpm; jabiru group?

Jabiru 2200 / 3300 discussions

3300 static rpm; jabiru group?

Postby messydeer » Tue Apr 19, 2016 12:19 pm

Hey, guys :-)

I'd like to know what the normal max rpm for a static ground runup for a 3300 is. I've got a Prince prop, fwiw. And what are you getting in flight for WOT?

Last question, where is there now a Jabiru group? Yahoo is down, usjabiru.net site says it's under construction.

Thanks!
messydeer
 
Posts: 22
Joined: Tue Apr 15, 2014 7:42 pm

Re: 3300 static rpm; jabiru group?

Postby fastj22 » Tue Apr 19, 2016 1:36 pm

At 6900MSL, my ground run up gets around 2700 RPM. In cruise, WOT at 8500 MSL I usually see around 3000RPM. Prince Ptip.

usjabiru.net changed to http://www.jabiruna.com/forum/

John Gillis
SEL Private, Comm Glider, Tow pilot (Pawnee Driver)
Waiex N116YX, Jabiru 3300, Tail dragger,
First flight, 3/16/2013. 403 hours and climbing.
Home: CO15. KOSH x 5
Flying a B-Model Conversion (Super Bee Baby!)
User avatar
fastj22
 
Posts: 1594
Joined: Sun Aug 21, 2011 5:56 pm
Location: Mile High

Re: 3300 static rpm; jabiru group?

Postby chris » Tue Apr 19, 2016 1:37 pm

Feel free to use the Jabiru section on our site here.

I did find the following after a google search:

Jabiru Owners Group

Jabiru Camit Yahoo Group
Chris
Sonex 1409
Slowly Scratch Building
Site Owner/Admin
User avatar
chris
Site Admin
 
Posts: 223
Joined: Thu Jun 02, 2011 8:15 pm
Location: Virginia

Re: 3300 static rpm; jabiru group?

Postby vwglenn » Thu Apr 21, 2016 9:53 am

I saw 2900RPM static yesterday. The accuracy or my MGL RPM is suspect though. Plane runs a Sensenich prop.
Glenn
Sonex #600
N889AP
vwglenn
 
Posts: 416
Joined: Mon Sep 15, 2014 1:00 am
Location: 6A2 - South of ATL

Re: 3300 static rpm; jabiru group?

Postby peter anson » Sun Apr 24, 2016 8:26 am

I used to run a 54 x 60 Prince P tip with carbon fibre coating. Full throttle static - 3000 rpm, full throttle straight and level - over 3300 rpm. Tach checked against optical tacho and is accurate. I measured the pitch of the prop and as near as I could measure, the pitch appeared to be a max of 59" rather than 60". Have since changed to a coarser pitch prop which is more suitable for cruise. What are you hoping to find out or achieve?

Peter
peter anson
 
Posts: 558
Joined: Thu Jul 31, 2014 2:34 am
Location: Mount Macedon, Australia


Return to Jabiru

Who is online

Users browsing this forum: No registered users and 38 guests