Hello

Hello

Postby Sonex1517 » Fri Jun 03, 2011 10:16 pm

Well, someone has to go first!

I am Robbie Culver, and my wife Brenda and I are new to the Sonex community. We attended the spring workshop, left with plans #1517 and our tail kit arrived about a month ago.

I am an instrument rated private pilot, used to own a Piper Cherokee and a Cessna 150F before that. I also am an active aviation photographer and writer, and have been doing a little work for Midwest Flyer magazine.

We chose the Sonex after I spent the last 9 years obsessing and analyzing and working through the idea until the time and the finances were right. And here we are...

We plan on building an AeroVee powered taildragger, intending to keep it simple and affordable (which is why we are building!)

So far the tail kit has been a fun beginning, and while we have barely gotten started on the journey, we are looking forward to the adventure we know it will be....

Hope to meet everyone and get to put faces to names over time....

Robbie Culver
Sonex 1517
Naperville IL
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX

Re: Hello

Postby N111YX » Fri Jun 03, 2011 10:31 pm

Best of luck to you with your project, Robbie. It is indeed quite a journey but the greater the effort the greater the reward... :)
Kip

2010 Waiex 0082 (first flight May 2010)
Jabiru 3300 #1637 and #3035
Dynon D-180
Becker radios
Garmin GDL 82 ADS-B
1175 hours
48 states visited
Based near Atlanta

Also flying a...
2000 Kolb Firestar II, Rotax 503, 575 hours
N111YX
 
Posts: 711
Joined: Fri Jun 03, 2011 9:43 am
Location: Atlanta, GA USA

Re: Hello

Postby onex28 » Thu Jun 09, 2011 10:30 pm

Hi Robbie and Brenda. Please read my post to Michael Farley and sub your names for theirs. My finger clicked on the wrong message.

David
onex28
 
Posts: 220
Joined: Thu Jun 09, 2011 9:43 pm
Location: MN

Re: Hello

Postby onex28 » Sat Jun 11, 2011 9:41 am

Liked your website Robbie especially the coverage of the DeKalb fly in. I presume it was EAA 241. I was a member when I lived in DeKalb and still have my chapter shirt with the flying corn! Got my private out of DeKalb as well, when they only had one runmway. If you are ever near Dixon look up Jack Bally who is building a 1/3 scale B-17. His site is www.ballybomber.shutterfly.com

Have good progress and I will check your site often.

David
onex28
 
Posts: 220
Joined: Thu Jun 09, 2011 9:43 pm
Location: MN

Re: Hello

Postby Sonex1517 » Sat Jun 11, 2011 3:07 pm

Hi David

Yes, that was us in the photos from the Sonex workshop on the web site, if you mean the most recent workshop at the end of April.

Thanks for the kudos - photography is another one of my addictions.

We're into the tail section now and enjoying each challenge we find. Some more than others. ;)

Robbie and Brenda
Robbie Culver
Sonex 1517
Aero Estates (T25)
First flight 10/10/2015
375+ hours
Jabiru 3300 Gen 4
Prince P Tip
Taildragger
N1517S
User avatar
Sonex1517
 
Posts: 1670
Joined: Fri Jun 03, 2011 10:11 am
Location: T25 Aero Estates, Frankston, TX


Return to Introductions

Who is online

Users browsing this forum: No registered users and 6 guests