SonexBuilders.net

A Forum for Sonex Aircraft Builders and Enthusiasts

Skip to content

LogoLogoLogo
random user submitted photo

AeroVee Camshaft

Discussion of the Aerovee kit engine.
Post a reply

AeroVee Camshaft

Postby John Usher » Tue Feb 23, 2016 8:50 pm

What type/brand of camshaft is used in the Aerovee and is it custom ground for aviation use or stock?
Thanks!
John Usher
Sold all my toys...
John Usher
 
Posts: 35
Joined: Thu Nov 15, 2012 3:05 pm
Location: East Tennessee
Top

Re: AeroVee Camshaft

Postby SonexN76ET » Wed Feb 24, 2016 10:52 am

The Aerovee camshaft is specified by and sourced by Sonex. It is part of their proprietary engine kit. I respect their right to keep it proprietary knowledge. I would do the same thing if I were selling engine kits.

Jake
Sonex Tri Gear, Rotax 912 ULS, Sensenich 3 Blade Ground Adjustable Propeller
MGL Velocity EMS, Garmin GTR 200 Comm, GTX 335 ADS B Out Transponder
ILevil AW AHRS & ADS-B In, UAvionix AV20S
200+ hours previously with Aerovee engine
Sarasota, Florida
User avatar
SonexN76ET
 
Posts: 494
Joined: Tue Aug 27, 2013 2:39 pm
Location: Atlanta
Top

Re: AeroVee Camshaft

Postby radfordc » Thu Feb 25, 2016 12:20 am

Since most every thing on the Aerovee comes from CB Performance I doubt that it is a special "aviation" cam. I'll bet it is one of these: http://www.cbperformance.com/SearchResults.asp?Cat=160
radfordc
 
Posts: 573
Joined: Fri Jun 03, 2011 9:39 am
Top

Re: AeroVee Camshaft

Postby rizzz » Thu Feb 25, 2016 12:55 am

radfordc wrote:Since most every thing on the Aerovee comes from CB Performance I doubt that it is a special "aviation" cam. I'll bet it is one of these: http://www.cbperformance.com/SearchResults.asp?Cat=160


I do not have an AeroVee myself so I cannot verify this but I have read on various forums that it is indeed the CB Performance "Eagle 2234" Camshaft (http://www.cbperformance.com/ProductDet ... tCode=2234) that is used on the AeroVee.
Michael
Sonex #145 from scratch (mostly)
Taildragger, 2.4L VW engine, AeroInjector, Prince 54x48 P-Tip
VH-MND, CofA issued 2nd of November 2015
First flight 7th of November 2015
Phase I Completed, 11th of February 2016
http://www.mykitlog.com/rizzz/
rizzz
 
Posts: 869
Joined: Tue Jun 21, 2011 2:07 am
Location: Wollongong, NSW, Australia
Top

Re: AeroVee Camshaft

Postby John Usher » Thu Feb 25, 2016 9:55 pm

Thank you for the info.
John Usher
Sold all my toys...
John Usher
 
Posts: 35
Joined: Thu Nov 15, 2012 3:05 pm
Location: East Tennessee
Top

Post a reply

Return to Aerovee

Who is online

Users browsing this forum: No registered users and 35 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

SonexBuilders.net is NOT affiliated with Sonex Aircraft LLC. Discussion contents reflect the views of individual participants only. The owner of SonexBuilders.net makes no guarantees about the correctness or the accuracy of ANY of the information on or in any area or page of SonexBuilders.net. Verify ALL information obtained from SonexBuilders.net with the kit designer, equipment manufacturer, or other original official source before using that information. By participating in this website in any form, (including but not limited to reading, viewing, posting, and private messaging) you agree not to hold the owner (AVED LLC), owner members, forum members, or advertisers of SonexBuilders.net legally liable for information found on any of the pages of the website.

SonexBuilders.net is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.